Junk as a representative of the USA
Daniel as a representative of Europe
Mixedgas to give his professional opinion
Junk as a representative of the USA
Daniel as a representative of Europe
Mixedgas to give his professional opinion
I should not do this. I don't have the tools needed. I vote mixedgas or planters.... They have the good stuff.
Thanks for the votes guys. I can produce 45 degree transmit and reflect plots using a broadband light source and the Ocean Optics spectrometer. I can also do a real world test using the 5.7W RGB projector I just agreed to buy from Edison
I agree junk has the tools he can produce a nice report.
chad
When the going gets weird, the weird turn pro.
then I vote junk as well just make sure to do both 520nm and532nm
There aren't any 520nm lasers in the lab here but the broadband test will show the cutoff wavelengths pretty clearly.
Qui habet Christos, habet Vitam!
I should have rented the space under my name for advertising.
When I still could have...
maybe you need to test them junk and then send them to Mixedgas for the oddballs. No harm getting more data. From what I saw from bridges testing they will do just fine. Also the ones dave has work real good for 520nm. While empirical, the test I did was do I see attenuation or a reflection. Nope worked great. That one passed blue and red and reflected green (520nm). I was able to dump my pbs cube with that dichro.
We hadn't reply from Daniel now, Daniel, are you still interesting do the test?
Till now, Junk is the most vote one, thanks Junk.
When I back to Beijing, our final decision will done.
Now, I am in Shanghai
Laser-wave can supply:
Green 532nm, 4W, 10W, 15W
blue 445nm, 2W, 3.5W, 6W, 10W
blue 462nm, 2W
Red 638nm, 500mW, 1W,2W, 4W, 5W, 6W, 8W, 10W
All diodes, All optics, All mount, All laser base and housing for yourselves building lasers.
Speical products, 532nm, OEM-V-SS, 4W, 98mm*46mm*48mm; OEM-H, 10W, 250mm*88mm*70mm
www.laser-wave.com or www.laser-wave.net
bridge@laser-wave.com or 463366312@qq.com
We Chat: 463366312, Laserwave-Bridge
hello,
Last weekend I installed the optics that I got thru bridge.
On all of my lasers so far there has been light that bleeds thru the dicro ( I used to call them tuning dots).
On the new ones there is only a faint dot for the red and none for the blue.
Being a novice I don't have a power meter ( yet).
I hate to think how much power I have lost in the past.
Thanks bridge.