Kevin might sell a dead one for $100... but come on...bids starting at $99 does not bean BIN for $100. He will list more I bet and he is a fair seller; the lasers test as he says. Best, Phil
Kevin might sell a dead one for $100... but come on...bids starting at $99 does not bean BIN for $100. He will list more I bet and he is a fair seller; the lasers test as he says. Best, Phil
Phil Bergeron( AKA 142laser)
suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.
No offense taken, but yeah, not gonna sell these at a loss.
I've had numerous inquiries about the D2 heads from my existing, mostly European customers. If there are any left after I get those folks taken care of, I'll put them up on eBay. I might end up with a few heads that are less-than-perfect which would sell for hobbyist prices.
I believe these require low voltage and high amperage. You might have to find a driver that can modulate a few tens of amps @ a couple of volts if you want to put these in a projector.
Yes, they are just the laser head with no driver electronics. You'll need a 25A laser diode driver (I recommend Lumina Power LDD-100) a 100+W TEC driver for the baseplate and a small TEC driver for the internal LBO heater (I recommend Wavelength Electronics MPT10000 and HTC1500).
AhhHHh we don't need no stinkin' drivers. We run everything wide open. Just need the currents and voltages aRRgh matey 5000 amps at 7.256V no prob
suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.
Please forgive the extremely late post but does anyone have a manual for the Jenlas D2.3 ??? Need one.
EDIT: Thanks, I had one emailed to me. Now looking for a Half-Note 2.5W 532nm manual for the laser head.
Last edited by Laser57; 08-19-2014 at 06:53.