Results 1 to 4 of 4

Thread: Clean used 10 mW polarized HeNe System: $250

  1. #1
    Join Date
    Jul 2005
    Location
    Tampa Florida
    Posts
    502

    Laser Warning Clean used 10 mW polarized HeNe System: $250

    Here is a good clean polarized OEM HeNe laser with TEM 00 outout.

    Melles Griot LHP 991 head, like new cosmetic condition, tested by lasersam and measured at 10.0 mW

    Round TEM 00 beam-beautiful

    Stable

    New power module, not used!

    Free shipping to the USA

    Phil, (813) 974-2378 Other HeNe lasers in all powers and other colors are available...yellows are IN STOCK!
    Attached Thumbnails Attached Thumbnails 000_2160.jpg  

    000_2161.jpg  

    000_2162.jpg  

    000_2163.jpg  

    000_2164.jpg  

    000_2165.jpg  

    Phil Bergeron( AKA 142laser)

  2. #2
    Join Date
    May 2007
    Location
    1 hr from everything in SoCal
    Posts
    2,787

    Default

    I am afraid to ask for a price for a yellow
    If you're the smartest person in the room, then you're in the wrong room.

  3. #3
    Join Date
    Jul 2005
    Location
    Tampa Florida
    Posts
    502

    Default

    Here are the prices off the SECRET Sam's Laser FAQ classified page. link is below. Oops, I snuck in an orange, sorry.

    HENEMGYFCL-1 Melles Griot fiber-coupled yellow (594.2 nm) 1 $ 1,250.00
    HeNe laser head with lab supply. New/NOS
    model 05-LYR-173. The output is a narrow
    beam from a collimator on a single mode fiber
    about 18 inches long (non-removable). The
    minimum output power after warmup is 3 mW from
    collimator. The spec is unknown but probably
    1 to 1.5 mW. Fine adjustment tube centering
    screws may be used to peak power to around
    4.5 mW.

    HENEMGYL-3D Melles Griot random polarized yellow (594.1 nm) 1 $ 600.00
    (594.1 nm) laser head with compatible 12 VDC
    power supply. Measured output of over 4.5 mW
    after warmup (rated 2 mW). New/NOS 2012. Note:
    May be slow to start.

    HENECOYL-5D Coherent (same as Melles Griot) random 3 $ 700.00
    polarized yellow (594.1 nm) laser head similar
    to HENEMGYL-3D, above, with compatible 12 VDC
    power supply. 5 to 5.25 mW after
    warmup (rated 2 mW). Like new.

    HENECOYL-4D1 Similar to above but 4.6 mW. 1 $ 600.00

    HENECOYL-4D2 Similar to above but 4.1 mW. 1 $ 550.00

    HENECOYL-3D Similar to above but 3.7 mW. 1 $ 500.00

    HENEPMYL-1D PMS LHYR-0200M yellow (594.1 nm) HeNe laser 1 $ 450.00
    head with compatible DC input power supply.
    2.75 mW (rated 2 mW), like new. Note that
    the beam is slightly multimode (by design)
    with a divergence of about 2 mR.

    HENEPMYL-21D PMS LHYR-0020 yellow (594.1 nm) HeNe laser 1 $ 425.00
    head with compatible DC input power supply.
    1.4 mW (rated 0.2 mW), like new.

    HENEPMYL-22D PMS LHYR-0020 yellow (594.1 nm) HeNe laser 1 $ 375.00
    head with compatible DC input power supply.
    0.7 mW (rated 0.2 mW), like new.

    HENELOR151D Melles Griot ORANGE (612 nm) HeNe laser head 1 $ 825.00
    outputting over 5 mW. New/NOS. There
    is also a bonus of a small amount of 604 nm
    (orange) and 594 nm (yellow) present, less
    than 10 percent. Includes compatible
    DC-input brick power supply. The head
    has a rear end-cap with a hole drilled in
    the center for the waste beam making it
    possible to add external mirrors front
    and rear to obtain other wavelengths.
    However, I don't know whether this is
    possible or which mirrors would be
    required.

    See it all at: http://www.repairfaq.org/sam/sale/

    All the stuff is backed up by myself and Sam Goldwasser so no worries about a bad laser. We are hopeless laser nerds. Best, Phil
    Phil Bergeron( AKA 142laser)

  4. #4
    Join Date
    Jul 2005
    Location
    Tampa Florida
    Posts
    502

    Default

    Sorry I forgot to add the power supply will drive 10 mW to 25 mW lasers up to 4 KV and 7+ mA current; it has a pot. New.
    Phil Bergeron( AKA 142laser)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •