Clearout - Cases, DT25 scanners, MM1 mounts, etc

[norty303]

Ok, I was going to hang onto these for a bit longer, but I now need to buy some flightcases for some moving heads so I need to raise a few funds.

I'll try and post some pics later when I'm at home.

I have a pair of ally (silver/bare metal) Chinese cases, the same style but slightly different as they were bought at different times, 1 80mm fan vs 2x 60mm, back panel layout, etc. Both are fitted with a set of Dragon Tiger DT25 scanners and have a DZ breakout board mk2 for each.
These were my first ever 100mW green lasers, and over the years have been all sorts, even 1.8W RGB's. As such, the baseplates resemble Swiss cheese a little due to all of the different components fitted over time.
They would make ideal first project cases, or a cheap start for a pair of single colour satellites or similar (which is what I was saving them for....)

I think they must be worth £200 the pair, I think I'd rather not split them, or break for parts at this point unless the demand is there for all of the parts separately.

IMG_1760.JPG IMG_1757.JPG IMG_1767.JPG IMG_1765.JPG

I also have quite an array of MM1 style mounts (from Rob Stanwax originally iirc) with the mounting foot, and also a 15mm and 25mm dichro mount. I will dig out of my drawer to see just how many (where do all these things come from??). Again, photos up this evening (GMT) if I can get round to it between being Dad and designing my flightcases!

The first 3 items on this page
http://shop.stanwaxlaser.co.uk/adjus...ounts-21-c.asp

There may be some other bits and bobs too, maybe a PBS or 2, I can't really remem,ber what I have laying around but if I don't need it and its worth something I'll probably sell it!


Post your questions here, and if you want to make offers or discuss purchases probably best to do it by PM so I get some notification. cheers

[norty303]

Here's a link to my first rebuild thread in 2009, with some pics of the case

http://www.photonlexicon.com/forums/...r-being-reborn!

And then when it became an RGY

http://www.photonlexicon.com/forums/...m-Green-to-RGY

[badger1666]

Hi adam how much for the three mounts ?

[norty303]

Which 3? I have a lot of mirror mounts (5 or 7 I think) and 1 of each of the dichro mounts

[dnar]

Must... resist... spending... any... more... money... ARghhhhhhhhh!!!!! The pain!!!!

[badger1666]

the build i am working on needs three plain adjustable mirror mounts(like dichro mounts without the hole) and one dichro mount 15mm
thanks

[norty303]

Ok, my bad, I forgot what I had.

I have:

2x MM1 style mirror mounts
3x 15mm dichro mounts (same size as MM1)
2x 25mm dichro mounts (larger than MM1)

All with feet. All 3 axis.

The 15mm dichro mounts look to have a coarser thread on the adjusters than the MM1 mounts.

I was thinking £20 each for the 25mm dichro mounts and £17 each for the others, round total down to the nearest fiver if you want multiples. What do you think?

IMG_1755[1].JPG IMG_1753[1].JPG

[Bradfo69]

I'm in for the two 25mm dichro mounts. That's also exactly what I was going to offer in a PM, along with shipping.

[norty303]

Ok folks, all of the mounts apart from one 15mm dichro mount are provisionally sold, pending payment.

Thanks for the interest so far.

All of the money from these sales is going on business with Winni (I get my flightcases from her), so depending on how much I've got (I am bloody skint at the moment, hence the sale) I'll see if she can get a bit extra too.

[dnar]

Let me discuss the cases/scanners with kit tomorrow... I want more stats yet am out of work so watching my outgoings......