Results 1 to 9 of 9

Thread: List of Goodies

  1. #1
    Join Date
    Aug 2005
    Location
    UK
    Posts
    305

    Default List of Goodies

    Hi Guys

    Sorry for the long delay. Very busy at the minute.

    Here is the first part of the kit for sale. Items are also for sale elsewhere ( not ebay !! )

    Prices are for guidance. I will obviously take the highest offer !

    I will wait for PM's for two weeks from today, at which time the highest offers will be notified of their purchase.

    Please note the prices are in USD . UK buyers will have to convert AND add the VAT. The rest of the world, you will have to pay the shipping and your local import taxes etc.

    I will post another list when this stuff has hopefully gone.

    None of the used diodes have more than 50 hours. Power measurements are done with a lasercheck. It's old and scarred, so it may not be 100% accurate , but certainaly well within 5% tolerance. Scan sets are used with very low hours, at most 50 or 60 .

    The diodes are all TTL units. All the info I have is listed. All prices are for single items !!


    1 * 120mW 532 Lasever Tem00 <1.7mm < 1.5mrad Power <+_ 5% $ 100.00
    1 * 120mW 532 Laser Century <1.5mm < 1.5mrad $ 150.00
    1 * 300mW 532/635 RGY ( 200/100) $ 1500.00
    1 * 100mW 473 Laser Century Temoo <1.5mm <1.5mrad $ 1400.00
    1 * 135mW 473 Yagang ( new ) $ 1350.00
    2 * 150mW 473 Yagang ( new ) $ 1500.00
    1 * 250mW 671 Laser Century Temoo <1.5mm <1.5mrad $ 1400.00

    1 * Mamba Black + Rockey + USB DAC $ 500.00
    2 * Chinese Galvo sets + mounts and Drivers ( 1*30k , 1*24k ) $ 300.00
    1 * Chinese Galvo set + mount and drivers 24k ( no mirrors and untested) $ 150.00
    2 * Pangolin LD2000 V4 4 disk Set $ 50.00
    3 * Silver Star USB DACS + I-Top Laser Software $ 200.00
    3 * SIlver Star USB DACS ( mains powered ) +I-Top Laser Software $ 200.00

    Also 1 * 400mW 635 Analogue CNI approx 4mm approx 3mrad. New , Open to offers.
    1 * CTI 6800 Scan Set + Mount + Drivers, very low hours ( Mirrors need changing )The CTI's are 6800HP units with the MicroAmp drivers. They are quite new , as the projector they came out of was a prototype technology tester , and it was only used a few times . The projector outputted 10 watts of 1064 from a Laser Quantum Excel . One of the mirrors is standard but appears to have lost its coating, the other is a diochroic, probably optimised for 1064nm. $ 750.00
    1 * Medialas Avatar Lite in immacculate condition with Key and manual $ 1500

    Thanks for looking.

    Regards

    Fluff
    Last edited by fluff; 02-21-2007 at 03:55. Reason: More Detail to listing
    The light at the end of the tunnel. Its' a white laser.
    www.rocknite.co.uk

  2. #2
    Join Date
    Aug 2005
    Location
    UK
    Posts
    305

    Default

    Just to let everyone know the 400mW 635nm has gone. It has been used in a new rgb unit.

    Thanks

    Fluff
    The light at the end of the tunnel. Its' a white laser.
    www.rocknite.co.uk

  3. #3
    Join Date
    Jan 2007
    Location
    Florida
    Posts
    4,382

    Default

    Fluff--
    (I like your avitar)
    Are the Chinese galvos DT-40s or ?
    Steve

  4. #4
    Join Date
    Aug 2005
    Location
    UK
    Posts
    305

    Default

    Hi Steve-o

    The 30k set are pictured on there own They were bought in as samples and tested over a month or so of occasional use.

    The other two pictures are a set out of a Silver Star YX2004 projector , which is one of their top of the range units.

    Hope this helps

    Fluff
    Attached Thumbnails Attached Thumbnails 30Kpps small.jpg  

    24k pps in block small.jpg  

    24kpps Drivers Small.jpg  

    The light at the end of the tunnel. Its' a white laser.
    www.rocknite.co.uk

  5. #5
    Join Date
    Jan 2007
    Location
    Florida
    Posts
    4,382

    Default

    Yeah Fluff thanks.
    I'll be looking for a set soon.
    Steve

  6. #6
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Question

    Will the silverstar DAC work with other soft ware? LDS for example.
    Love, peace, and grease,

    allthat... aka: aaron@pangolin

  7. #7
    Join Date
    Aug 2005
    Location
    UK
    Posts
    305

    Default

    Hi Guys

    A quick update.

    I will send PM's to all who have made offers. Thanks everyone ! I will also let you know the shipping costs.

    I'll send my bank account details so the buyers can make a transfer. You can also paypal me, but you will have to swallow the charges. Items will be despatched on cleared funds

    I'll do this in the next couple of days.

    I will then be posting a new list ! Coherent Innova Argon + Krypton multiline 8 watt anyone ?

    Thanks for all your interest.

    Fluff
    The light at the end of the tunnel. Its' a white laser.
    www.rocknite.co.uk

  8. #8

    Default

    so why did you tell me i had to pay via cheque???

    and do i need to take further action as you say you dont have it yet?
    Eat Sleep Lase Repeat


    Aluminium Optic Mounts

    http://www.laser-man.co.uk/opticmounts/

  9. #9
    Join Date
    Aug 2005
    Location
    UK
    Posts
    305

    Default

    Hi Andy


    I told you I would despatch on cleared funds. I didn't ask for a cheque. That's what you offered. I did say you could collect and pay cash too . You can pay however you wish. But....your cheque has arrived today!

    The bank transfer offer is primarily for overseas guys, as its quicker and easier. But its open to anyone. However, it would have cost you extra to do a transfer .

    Where does it say " I don't have it yet " ?? All the stuff listed is in my warehouse looking at me.

    I will despatch to you as soon as your cheque has cleared. Please pm me if you need any more information regarding the payment.


    Regards

    Fluff
    The light at the end of the tunnel. Its' a white laser.
    www.rocknite.co.uk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •