Results 1 to 3 of 3

Thread: DPSS Issues

  1. #1

    Default DPSS Issues

    GLMC100 module, and my issue is ttl blanking does any one have one of these units doing ttl blanking. A while back the switch got jammed and instead of replacing it I just moved the wire to turn it on, but I see that maby things could be hooked up wrong im going from an alphalite pro unit to it and cant get it to blank, ive tried a few things but im not sure where to turn next. here is a pic of the dual board setup inside.

    http://ltaudio.dynu.com:8081/stuff1/one.jpg

  2. #2
    Join Date
    Jun 2005
    Location
    SoCal
    Posts
    490

    Default

    You're modulating using the BNC connector right? What pinout did you use?

  3. #3

    Default

    I tried the I+ and the I- and I tried the I+ and ground for the scanners, pins 3, 16, and 25 it seems to short out and die when even touch the pin 25 to the neg of the bnc.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •