Earlier this year I purchased 2 identical lasers from Wini. They were 3 watt RGBs with analog modulation & DT40 pros...Or so I thought. Last night was the first time they were both used together, and apparently they have vastly different scan angles (I was not at the venue). They were first daisy chained using one FB3, and since the lasers do not have a pattern size adjustment, I recommended using separate FB3s for each so that the sizing could be done in quickshow. It turns out one of the lasers has an unusually narrow scan range; Could the scanners be tuned incorrectly? Could one projector have DT40 wides instead of pros (and can they be identified by visual inspection)?
Eric