Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: Just a couple holes.

  1. #1
    Join Date
    Apr 2010
    Location
    Grand Rapids, Mi
    Posts
    2,538

    Default Just a couple holes.

    Drilled and tapped for the new build. 4w 638, 4w 445, 1w 405 (gonna try to get the angle right with the mixing dichro) while I was at it added the holes for either 1 or 2W of 520 depending on if 532 is PBS in or not. All with correction mounts in place.

    Spatial filters will be on the main base plate.

    Waiting for a package from Dave, then I'll complete the red and blue build, will be done hopefully in the next couple weeks.

    image.jpg
    leading in trailing technology

  2. #2
    Join Date
    Nov 2010
    Posts
    346

    Default

    wow! Oldschool way of designing?

  3. #3
    Join Date
    Feb 2011
    Location
    New Hampshire
    Posts
    3,513

    Default

    I often use an "out of school" technique. I will often do the initial lay out as you have done and then break it down into several stages. The first stage involves those components that don't have a lot of freedom such as the DPSS and the scanner. I'll go ahead and drill and tap those holes along with the power feed thorough(s) and then actually mount the components. I'll run the laser and use it to adjust the next stage a bit by setting the components where they actually need to be. I'll then go ahead and drill and tap those holes as well. As long as they line up I will frequently drill a trio of holes where one is needed to give more set up adjustment without needing to modify the component or nailing the hole position perfectly. These extra holes don't take long when your drilling one hole anyway.

    This might seem to take more time, but the savings on adjustments for an interference or for failing to take into account a spacing such as the finite thickness of a steering mirror is well worth it.

  4. #4
    Join Date
    Apr 2010
    Location
    Grand Rapids, Mi
    Posts
    2,538

    Default

    Just got to add 11 more holes. Testing the design layout couldn't get correction optics close enough to the 4 combined diodes, the aperture size was to big. Now using pairs of diodes, correct each pair then pbs for a 4x4.5mm aperture.

    Bbe this would be much easier if you sold that quad red hardware.
    leading in trailing technology

  5. #5
    Join Date
    Nov 2010
    Posts
    346

    Default

    I always thought my quad module provides 2 watts of red

    Bbe this would be much easier if you sold that quad red hardware.
    I may consider selling my module, but I'm not ready to sell hardware for it.
    BTW, a good idea about a quality fulldiode rgb on a single baseplate!

  6. #6
    Join Date
    Apr 2010
    Location
    Grand Rapids, Mi
    Posts
    2,538

    Default

    Quote Originally Posted by Bbe View Post
    I always thought my quad module provides 2 watts of red
    I use the p73 and over drive and tec them. Had 3.8w out of the last quad. I assume if pushed yours would do it.

    Also are you the seller out of X-wossee (sp?) on ebay? Considered buying the driver but usually am more cautious with international sellers. If that's you I wouldn't worry then.
    leading in trailing technology

  7. #7
    Join Date
    Nov 2010
    Posts
    346

    Default

    Need to try to kick my module and prepare $200 for new diodes
    yes, x-wossee is my acc

  8. #8
    Join Date
    Apr 2010
    Location
    Grand Rapids, Mi
    Posts
    2,538

    Default

    Have the blue added. Was pretty happy mounting the wave plate direct to the PBS. Figure once better PBS is available should see well over 4w.


    image.jpgimage.jpg
    leading in trailing technology

  9. #9
    Join Date
    May 2007
    Location
    1 hr from everything in SoCal
    Posts
    2,833

    Default

    Quote Originally Posted by polishedball View Post
    I use the p73 and over drive and tec them. Had 3.8w out of the last quad.
    What kind of life span are you getting out of them? I suppose that depends on how much you run your projector but I am curious how they are holding up, being overdriven. I have a handful of g71s that I am going to be using in my lumia. I was thinking of pushing them to 400mW for better visibility but since they will be at 133% for several minutes at a time, I might just run them at recommended max.
    Last edited by absolom7691; 12-28-2013 at 18:05.
    If you're the smartest person in the room, then you're in the wrong room.

  10. #10
    Join Date
    Feb 2011
    Location
    New Hampshire
    Posts
    3,513

    Default

    I run 4 of the G71s at 800mA each in one of my projectors now for about 1 year and several hr/ week and so far all are good.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •