-
200mw laser pointer parameters
Recently bought a branch glued crystal laser pointer, the seller said that the output power is between 150mw-200mw. I contrast with online video like 200mw laser pointer, and found the light darker. I measured operating power is about 400mw, the working voltage of about 5V, the resistor under test. Whether calculated output power? Operating power did not count.
But the work is a direct measure current and voltage in the circuit. I bought the laser cheese also Kester. I said above, the operating power is current, sorry wrong, is 0.4A, 400mA as I test out the operating voltage and current, calculated by P = UI input power is 2W.
-
Hi Saxon
My knowledge is limited in these things but operating power is different to optical power or power density of the beam. This should be measured with a laser power meter.
The difference you may be seeing could be due to the eye's sensitivity to different wavelengths of light or simply that laser pointers aren't usually made particularly well. Their ability to dissipate heat is one issue that I have read about.
Hope this is helpful.
Keith
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules