Lasever OEM 500MW Installation

[nnasire]

hey all,

little bit confused on the initial hookup here.. I would experiment and find out by trial and error myself, but after 3 laser diodes wigging out on me from this, I realized PL can save me--

images: http://imgur.com/a/6tCpE#0

correct me if im wrong; i'd cut and make new tongue spades for the 'G' and '+5V' wire and connect to 'V-/V+'?
OR just unscrew/remove 'G' and '+5V' from the red laser driver and re-insert it into the mini power supply's 'V-/V+' slot?
What about TTL connection for this red laser? -my blue and green lasers are TTL connected
only thing i'm sure about is 'L' 'N' and 'Ground' from the red laser's mini power supply will go to main power supply (image #4 in the back)

I do have DC parts for the DC input if needed..

[VDX]

... 500MW? - seriously? ... do you have a direct link to your local power-plant? ;-)))

I think, this should be something like 500mW or 0.5W ...

Viktor

[nnasire]

... 500MW? - seriously? ...

semi-serious http://i.imgur.com/1LmiEmt.jpg

[steve-o]

Lol mega ..
Ok here ya go ..


Oh and almost forgot.. for testing you can hook the red modulation wire to the +5V terminal.