Hi guys,
is there some interest in dual and quad channel drivers? Both are based on my LDTEC driver LINK just without the TEC driver.
They will be available within 4 weeks or less.
As a well known driver here has become a nightmare I started to think about my own version of both drivers.
For this drivers a startup delay has been added.
The drivers will have connectors to the left and to the right (male and female). So they can be connected laterally and share the power supply input. By using four drivers you will save 3 power input cables and space inside the projector.
Different from the LDTEC driver there will be only one 10 pin connector for the dual or 2x 10 pin connector for the quad channel.
The price will be ~55€ for the dual channel and ~70€ for the quad channel version.
The prices above are based on a qty. of 250pcs. In case the interest rises above, the price may drop.
Current: 2000mA each channel
Power supply: 5-12VDC
Modulation: >200kHz Analog / TTL
Size: 40 x 50 mm (dual channel)
Standby Beam Suppression: YES
Startup delay: 2 sec
Separate modulation: Yes, for each channel
IŽd like to ask you to post here the channel version and the qty youŽre interested in. The final price will be calculated on the qty we all are interested in. Worst case is that the price remains the same as stated above.
Alex