Page 1 of 3 123 LastLast
Results 1 to 10 of 29

Thread: New Projector Build

  1. #1
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,648

    Default New Projector Build

    Got a couple of builds on at the moment.

    someone wanted a custom build, but one off designs are a pain in the arse. so I spend a fair amount of time designing a case that would fit my needs also. the case is two levels as most are, lasers on one, psu's on the other.

    fan cooled, but sealed housing. fans are temperature controlled
    screen displaying temperature of each module and base plate on back of case
    XY flip
    robs ilda interface board/safety board
    Edmund optics AR window with aperture mask

    the photos below are of the one off build im doing, but the one im doing for myself in exactly the same case is a 12w RGB. 4w of each colour, using a 4w RGB lasersystems red

    just waiting on the rest of the case to be machined, am not doing it myself this time. fingers crossed I can pick it up this week and then get it powdered coated
    ive just machined all the bits that go on the case and in the case

    it measures 350mm wide by 250mm deep by 300mm high
    I recon the case is good for 15w of RGB

    enjoy







    Eat Sleep Lase Repeat

  2. #2
    Join Date
    Aug 2010
    Location
    Hungary
    Posts
    221

    Default

    mmm i really like these cube builts.
    Very nice Andy!

  3. #3
    Join Date
    Aug 2013
    Location
    West Sussex
    Posts
    1,279

    Default

    Great to see another build on here Andy - looking very nice indeed!

    Keith

  4. #4
    Join Date
    Aug 2008
    Location
    UK
    Posts
    5,704

    Default

    12W.

    Very nice Mr. Con. If you have one spare.....

  5. #5
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,648

    Default

    sadly I don't, wish i did
    Eat Sleep Lase Repeat

  6. #6
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,648

    Default

    this is how it will look once finished

    Eat Sleep Lase Repeat

  7. #7
    Join Date
    Nov 2013
    Location
    State of Shock USA
    Posts
    608

    Default

    That thing is a beast.

    Why does it have an ILDA out? Can you piggy back projectors?
    “Be who you are and say what you feel, because those who mind don't matter, and those who matter don't mind.” ― Bernard M. Baruch

    "They that can give up essential liberty to obtain a little safety deserve neither liberty nor safety."
    ― Benjamin Franklin; stairwell plaque in the Statue of Liberty

    "And so shines a good deed in a weary world." - Willy Wonka

    6 Steps To Prevent You From Getting SCAMMED On The Internet CLICK

  8. #8
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,648

    Default

    you sure can .
    Eat Sleep Lase Repeat

  9. #9
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,648

    Default

    I finally have the rest of the case

    Eat Sleep Lase Repeat

  10. #10
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,648

    Default

    we have light

    Eat Sleep Lase Repeat

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •