Results 1 to 5 of 5

Thread: Dave's 0~5V/0~10V DMX board

  1. #1
    Join Date
    May 2007
    Location
    1 hr from everything in SoCal
    Posts
    2,753

    Default Dave's 0~5V/0~10V DMX board

    I finally got around to beginning my lumia build. This is going to be several weeks or more in the making but at least I have broken ground. For cueing up my lumia motors, I have a DMX LED dimmer which is going to act as a speed control for the motors to go from about 0.2rpm to 0.6rpm. As far as the lasers go, they will be cued up using the DMX boards that Dave sells here: http://lasershowparts.com/store/inde...&productId=285

    This board is easy as a breeze to set up. I had been looking for something like this for a long time and I am glad that someone in our own backyard sells it. This, in conjunction with the "speed controller", will allow me to cue up every aspect of my lumia (speed, color and brightness), straight off Beyond cues. I shot a brief video of the board in action. The jumpiness of the blue has nothing to do with the DMX board, I just need to adjust the 0 bias on the driver. The DMX console is a cheap one too.

    This is an awesome board and it will get used well. Thanks for carrying these, Dave!

    Last edited by absolom7691; 01-04-2014 at 04:18.
    If you're the smartest person in the room, then you're in the wrong room.

  2. #2
    Join Date
    May 2007
    Location
    Romania
    Posts
    1,041

    Default

    Nice review and Nice board but I think I am going to state the obvious here "can't you do that already with the ilda connector on the flashback"

  3. #3
    Join Date
    May 2007
    Location
    1 hr from everything in SoCal
    Posts
    2,753

    Default

    Sure but these are static lumias that I will be running, each with their own RGB laserset. These will be running in tandem with abstract projections so, the flashbacks will already be in use. I probably should have made that more clear.
    If you're the smartest person in the room, then you're in the wrong room.

  4. #4
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,702

    Default

    Cheers Brian!

    Glad you like the board
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

  5. #5
    Join Date
    Sep 2014
    Posts
    1

    Default

    Hi firend, That's how pretty you do it! Can you tell me Which drive IC did you use? Similar to the LPD6803 drive IC in the website as follows
    (http://www.ledlightmake.com/rgb-addr...rip-p-271.html)
    right ? Can we substituted The program code for that Mixer?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •