Results 1 to 3 of 3

Thread: DMXKING usb rdm pro controller

  1. #1
    Join Date
    Feb 2013
    Location
    laughlin, nv
    Posts
    46

    Default DMXKING usb rdm pro controller

    I have a dmxking usb controler i have listed on ebay. complete with the usb cable and 3 ft dmx cable. No reserve.

    http://www.ebay.com/itm/281283399682...84.m1423.l2649

  2. #2
    Join Date
    May 2006
    Location
    Native Floridian
    Posts
    3,083

    Default

    Any idea if this will work with Beyond?

  3. #3
    Join Date
    Feb 2013
    Location
    laughlin, nv
    Posts
    46

    Default

    Extensively tested with Pangolin QuickShow and Beyond with DMX Input performance that's so good we had to add a special slowdown option because the Pangolin software couldn't keep up! Enttec USB Pro has problems with DMX Input to QuickShow when fed from full rate DMX sources such as HOG consoles however with the ultraDMX RDM Pro's unique DMX Receive Throttle control this is solved under all circumstances. 100% compatible with DMX USB Pro Widget API Specification 1.44, a widely used publically available protocol developed by ENTTEC for their USB Pro unit. Software that works with the ENTTEC Pro unit will also work with the DMXking entire ultraDMX range including DMX input. Unlike some other low cost devices this is not just a copy of some other product and it runs field proven firmware developed by DMXking for the ultraDMX range of products.

    This USB DMX interface is perfect for Pangolin Laser Show Designer QuickShow, Vixen (free), FreeStyler (free), MagicQ (free), DMXControl (free), Martin M-PC (free), ShowMagic (free 24ch), Light-O-Rama, LightShow Pro, LightFactory, LumiDMX, LightJams, MADRIX, LCompanion (for Luminair on iPad), Modul8 and many others.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •