Who makes a good 9 watt?

[slicklasers]

I am offering 40k, 5Watt Corrected RGB laser for $5000USD with all safety features, in a CDRH Certified projector with e-stop, xy flip, ILDA in and out, no internal or DMX control, only ILDA.

[jamesx1234]

If it was me I would go with two lasers so you can be far left, far right off the stage. Those led walls are killer for lasers. Plus the dam light guy is in your way if you only have one laser going down the middle. Two 5 watt rgb is just right for indoor shows. For outdoor shows having large foggers with industrial fans is more important than the power you bring.

[carlos3621]

That's about what I thought it would run. Of course that's direct from Kvant, I wonder if the US varianced version is the same price?

Greg

The varianced Kvants are the same price, dealers get them at a lower price than listed on website, to allow for their profit margin

[carlos3621]

If it was me I would go with two lasers so you can be far left, far right off the stage. Those led walls are killer for lasers. Plus the dam light guy is in your way if you only have one laser going down the middle. Two 5 watt rgb is just right for indoor shows. For outdoor shows having large foggers with industrial fans is more important than the power you bring.

not to mention, nobody wants to hire just 1 laser anymore, most productions now request multiple lasers, minimum of 2, but most request 4 RGB projectors nowadays...

[andy_con]

what scanners and laser modules do you use?

I am offering 40k, 5Watt Corrected RGB laser for $5000USD with all safety features, in a CDRH Certified projector with e-stop, xy flip, ILDA in and out, no internal or DMX control, only ILDA.

[slicklasers]

That would be with DT40 pro scanners, same diodes as everyone else, Mitsubishi, Nichia, Green DPSS is Optlaser.

[andy_con]

ah ok so its not a full diode projector and has fat diode reds in it. I was wondering if you purchased modules or made your own.

explains the price difference that's all

[slicklasers]

not a full diode projector, but the reds and blue are corrected, so all have about a 5mm beam, <1.5mRad divergence. We can do all diode with the 1200mW 520nm greens but it brings up the price just a little bit.

[andy_con]

I hate using the multi mode reds, from now on I will only use single mode

Expensive but such better results

[JRGixxerfreaK1]

I hate using the multi mode reds, from now on I will only use single mode

Expensive but such better results

I second that Andy!
Im also done with Mitsu, sure the price is nice for the power you get, at the end of the day im sticking with single mode reds