Results 1 to 7 of 7

Thread: Question

  1. #1
    Join Date
    Apr 2012
    Location
    Spain
    Posts
    133

    Default Question

    Hey guys.

    I have a question.
    If I use USB Audio DAC + Amp mod Laserboy Correction, I use the TTL circuit of the laser module (image), or connect directly to the module?

    Click image for larger version. 

Name:	sshot-1.jpg 
Views:	20 
Size:	80.4 KB 
ID:	42630


    Best Regards.
    Juanma.
    Last edited by juanma666; 03-21-2014 at 16:22.

  2. #2
    Join Date
    Apr 2012
    Location
    Spain
    Posts
    133

    Default

    Sorry for my expression, I'm from Spain and I use a language translator.
    I want to know if I have to connect the modules directly to the Laser Boy card, or have to use the TTL circuit. And connect it to the card.

    Help please.
    Thank you.


    Juanma.

  3. #3
    Join Date
    Aug 2013
    Location
    West Sussex
    Posts
    1,279

    Default

    If I understand correcty, you need to hook the modulation from the DAC to the TTL input of the diode driver. I don't know anything about the dac you are using.

    You will need to set the modulation setting in your software to TTL (Transistor-Transistor Logic) rather than analogue.

    <edit>If you have a colour correction board, as far as I understand it, I do not think this will work with TTL laser modules.</edit>

  4. #4
    Join Date
    Mar 2013
    Location
    Langhus - Norway
    Posts
    349

    Default

    You will have to connect to the driverboard in the picture. I beleve all the connections are described on the backside of the plastic-cover of the driver. I is marked with TTL and it is also omportent to notice the + - (positive/neagive) polarization for all cables. Do not trust the plugs/cable as there is no standard for this on chineese equipment. From what i can see in the picture, it is a chineese module (probable a blue) with no tec-cooling. Only a 12V output for the cooling fan, input for 12V power, Input for the TTL and output for the laser diode.

    The Blue potentiometer is for adjusting the output current of the LD- (Laser Diode).
    __________________________________________________ __________

    More projects than time available.
    More projects started than finished.
    More money spent than earned.
    More failure than success.
    Just got to love lasers!

  5. #5
    Join Date
    Apr 2012
    Location
    Spain
    Posts
    133

    Default

    Hello friends.
    Thanks for the replies.
    I will not explain properly, sorry. My question is if I use (DAC) sound card + card Laser Boy (image), we must also use Chinese module circuit, or is not necessary.

    Click image for larger version. 

Name:	sshot-3.jpg 
Views:	6 
Size:	134.6 KB 
ID:	42662


    Thank you very much.
    Juanma.

  6. #6
    Join Date
    Mar 2013
    Location
    Langhus - Norway
    Posts
    349

    Default

    Short answer = YES!

    you need the it.
    __________________________________________________ __________

    More projects than time available.
    More projects started than finished.
    More money spent than earned.
    More failure than success.
    Just got to love lasers!

  7. #7
    Join Date
    Apr 2012
    Location
    Spain
    Posts
    133

    Default

    Thanks.
    Best Regards.

    Juanma.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •