Analog Laser Watch on building?

[yaddatrance]

Pointers are not rated for continuous use and will fail pretty quickly.

Jim

That's a valid caveat, if you already have the pointer, you will need to adequately cool it by heatsinking it and blowing a fan over it. 100mW is big enough that in continuous duty modules, they are normally actively TEC cooled. A fan is sufficient as in your case you are not concerned with beam stability.

[Loopforever]

>crunch

Did you try putting Vista in XP combality mode?
(Right click on exe, Propeties, Combality, XP)

Or maybe its the driver?

http://www.lockware.com/download.htm
Update help?

What about Virtual PC, running a XP disto?
(Will probaly not work, when i think twice..)

Also there is some 2007 updates on:
http://www.laserdesignstudio.de/?x=downloads

Could really use the pics, so the customer choose to buy it.

Best Regrads
Johannes

[Loopforever]

A fan is sufficient as in your case you are not concerned with beam stability.

Did not buy any laser yet.
(I do sell 5-200mW lasers so that how i know them,
the 100mw cost about $100)

If not i end up using a 100mW green laser pointer, cooler with heatsink+fan+some DIY blanking, can you recommended at good and cheap laser?

Beam stability seems pretty good with the 100mW laser(Have a startup time in about 30sec), but maybe not when powered on off quickly..?
(Its a DPSS laser)

Anyone tryed to make a blanking mod to the Newwish lasers pointers, with good result?

Well maybe its best with a good laser from the start,
but it could be fun if my "crasy" laser pointer idea worked

Best Regrads
Johannes

[Loopforever]

Found solution for LDS2007 in Vista Found a solution on a forum - hopefully

http://www.laserfreak.net/forum/viewtopic.php?t=40438
(Mit dem Update vom 6.02.2007 läuft LDS nun auch unter Vista.)

Newest update:
http://www.laserdesignstudio.de/?x=downloads

Pic in Vista:
http://da2001.de/tmp/vista.jpg


Do someone have a password for the downloadable LDS Trial version?

Best Regrads
Johannes

[Loopforever]

>CT6800
Also a option - is there any difference between the DT-40s? (Tested alot more, but more than that?)

>yuppatrance
Thanks - i take a look on thoose galvos also.

Will try asking customer if he need reduncecy, but don't think so.

[allthatwhichis]

Do someone have a password for the downloadable LDS Trial version?

Best Regrads
Johannes

Damn, I had it but can't find it. Try "LDSDemo"... This is a guess though. I'll try to find it when I get home later.

[Loopforever]

>Try..
Did not work.

>I'll try to find it when I get home later
Thanks

[cruch]

Got LDS working now! Will take som shots now...hold on.

Here it is!

Remember...I am not any photographer ;D

[Loopforever]

Hi,

Looks really cool

What galvos+drivers are you using(40k?) and what about the lasers used?

Thanks you so much, will post it to customer right away

[cruch]

DT40Pro's offcourse ;D
Used a RGB lasersystem, only 370mW of power
Scanspeed @ 30k