Results 1 to 4 of 4

Thread: Need HELP Galvo System Tuning

  1. #1
    Join Date
    Mar 2014
    Posts
    7

    Laser Warning Need HELP Galvo System Tuning

    Good day!

    I have one galvo (AL-30K) from goldenstarlaser.com LINK: http://www.goldenstarlaser.com/al30k...8m78nvlv5er3v4
    I dont have For this User Manual. My test picture is vibrate a lot. I neet it tuning. I dont know potmeters!

    I have Pangolin QuickShow FB3. I have galvos from the wall 1m and 14 cm the picture.

    Pictures & Video:

    Click image for larger version. 

Name:	20140501_174900.jpg 
Views:	36 
Size:	2.60 MB 
ID:	43061
    Click image for larger version. 

Name:	20140501_174914.jpg 
Views:	21 
Size:	2.71 MB 
ID:	43062
    Click image for larger version. 

Name:	20140501_174937.jpg 
Views:	15 
Size:	2.89 MB 
ID:	43063
    Click image for larger version. 

Name:	20140501_174947.jpg 
Views:	16 
Size:	2.87 MB 
ID:	43064




    Quick Show setting: 30Kpps

    THANKS!
    Sorry for bad english!

    Peter from Slovakia

  2. #2
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,489,446

    Default

    Have you contacted Goldenstar to ask them if they can send you a manual for your scanners?

    Before you tune your scanners, you need to identify the potentiometers for Servo Gain, Low Frequency Damping, and High Frequency Damping.

    Once you've done that, you can follow the instructions here to tune your scanners.

    Adam

  3. #3
    Join Date
    Jul 2010
    Location
    Netherlands
    Posts
    3,314

    Default

    You wilkl have to do the reverse engineering yourself.
    The AL factory does not speak english and does not supply any pot guides.
    Went there, tried that and reverse engineered the whole amp when that happened here for both 20 and 15
    *only difference between 15 and 20 is High frequency damping btw*

  4. #4
    Join Date
    Aug 2010
    Location
    Hungary
    Posts
    221

    Default

    If anyone would have problem to identify the AL-30k scanner set's potentiometers,i gave a look at the photos.I did the reverse engineering,tracing back the strips based on the best known galvo amplifier schmatics
    Here you are:
    Click image for larger version. 

Name:	20140505_164333.jpg 
Views:	46 
Size:	3.76 MB 
ID:	43087
    I gave Peter remote assistance and all of the important three + 'size' pots are correctly identified,he tried them in real time with the ILDA test pattern.
    Last edited by epyn; 05-05-2014 at 10:52.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •