-
Lasermodule housings
Hello Guys
Due some design changes i decided to sell of some lasermodule housings. Topcover is totally one piece and milled out of 1 piece of aluminium. Both topcover and baseplate are anodisized. Including peltiers, safetylables , screws and seal.
I have 2 versions , a small and a bigger version. They are available with our without tube.
Size small housing:
Outside dimensions: 115x60x56 (footprint)
internal dimensions: 85x50x44
Baseplate dimensions: 115x60x8
Cutout for 40x40 peltier.
Size Big housing:
Outside dimensions: 130x100x56 (footprint)
internal dimensions: 100x90x44
Baseplate dimensions: 130x100x8
Cutout for 40x40 peltier 2x
Brass plate dimensions: 92x52x5
Price small housing : 40 euro
Price Big housing : 60 euro
Optional tube: 10 euro. (only 24 in stock)
I have 60 small ones and 40 bigger ones. Buy 10 pieces and you will get 1 free. Buy the whole lot and you get 10 free.
Shoot me a PM when questions.
Last edited by edison; 12-26-2013 at 02:35.
Interested in 6-12W RGB projectors with low divergence? Contact me by PM!
-
Bump..... Would fit a nice RGB single setup aswell
Interested in 6-12W RGB projectors with low divergence? Contact me by PM!
-
MayB no one is responding to this, because you're not responding to PM's ???
HOME-GROWN RGB PROJECTOR ALMOST FINISHED...
-
Laser-wave 2.5W 445 ,
2W 532 & 1.8W 637
-
Stanwax® ilda- , colourcorrection- , ds3- , power distributionboard & key-stop with start button
-
DT40-pro scanset @30K (Quickshow Limited)
powered by :
P a n g o l i n
-
Yours got burried under the workload. Allot of questions i remember. Made up your mind yet?
Interested in 6-12W RGB projectors with low divergence? Contact me by PM!
-
I understand it's all messed up in my head
But i'm waiting for a bag with money then i'll buy 2 of them.
I'm looking forward to build a RGB single mode module and
a high power multimode Red&blue for my green laser
Johan, i wish you a merry christmas and good luck in 2014 !
-
Hello Johan,
Allright i got only one question
I'm planning to buy 2 big ones so there is space enough for all my needs
What kind of Plug/Connector Holes are drilled in the back of the module ???
Because i don't wanna make a mess with some kind of "kit" or silicone glue !
oh yes and 2nd question is coming around
Do you also sell the drivers you have posted on you're Fb ??
Thnks in advance.
Merry Christmas and Best wishes for 2014
Sander
-
I have 10 of the connectors in stock that fit in that hole at the back. There are a few commercially available like the one from dave for example so that shouldn,t be a problem.
Also a merry christmas and best wishes for 2014.
Interested in 6-12W RGB projectors with low divergence? Contact me by PM!
-
2 more pictures added to show the connector.
Interested in 6-12W RGB projectors with low divergence? Contact me by PM!
-
Thnks Johan !
That's a nice one !!
I found these, but it's a plastic one (don't like it)
- http://www.conrad.nl/ce/nl/product/7...AA4A&WT.srch=1
-
Price dropped on these. Small housing : 30 euro and the big housing 50 euro. Buy 5 or more and get one free
Interested in 6-12W RGB projectors with low divergence? Contact me by PM!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules