Results 1 to 4 of 4

Thread: Single mode diode hardware kit

  1. #1
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,702

    Default Single mode diode hardware kit

    I thought I might package some of the parts I have here into a little kit and add some discount

    As pictured, 3 diode housings, and 2 flex mounts - mix and match brass diode housings, either 3.8mm, 5.6mm or even 9mm ( although 9mm diodes aren't single mode! )

    This combo I can sell to PL crew for $70AUD plus shipping

    Attached Thumbnails Attached Thumbnails singlemode kit.jpg  

    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

  2. #2
    Join Date
    Jun 2014
    Posts
    8

    Default

    hi yep this is the sort of thing am after do you have it so i can mount a diode in the housing with lens that is 12x30mm as that is the size of my diodes hope you can help
    thanks

  3. #3
    Join Date
    Dec 2008
    Location
    veenwouden
    Posts
    2,580

    Default

    Oh you want this:

    http://www.o-like.com/index.php?main...roducts_id=125

    and this ? :

    http://lasershowparts.com/store/inde...&productId=210


    I think you want an aluminium mount to clamp in an Axiz diode/lens holder. But that is a very bad way of doing things. Its better to fit the diode in a brass holder from dave and mount a flexmount in front of it to steer/stack the beam.
    Last edited by edison; 06-20-2014 at 06:22.


    Interested in 6-12W RGB projectors with low divergence? Contact me by PM!

  4. #4
    Join Date
    Jun 2014
    Posts
    8

    Default

    hi that be great for my project then once have finished teh first will order more am just getting all my bits sourced the will be ordering.
    thnaks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •