Page 1 of 4 1234 LastLast
Results 1 to 10 of 37

Thread: rgb updated pics

  1. #1
    Join Date
    Apr 2006
    Location
    KENT
    Posts
    188

    Default rgb updated pics

    Well folks, i finally upgraded to rgb from my lil'ol 100mw green. Colour makes such a difference. Attached a few pics for your perusal. I origionally had the single green in a large unicase, but had to add another layer to get everything in.........i was a bit worried about heat dissipation on the lasever units from aiiij (dave) but they are mounted on 10mm ali baseplate and seem ok...(thanks dave, excellent delivery)...i put fans on the psu's along with a 10mm ali strip......i should have paid more attention in metal work classes, however i did tap my own holes etc (wow).

    250mw 660nm, 100mw 473nm, and 100mw 532nm.
    the rest of the gear are the 9024 wide moves, 20 sector polygrating, blue and red dichros and fine mirror mounts......alignment maybe slightly off but hey......we are rocking and rolling !........software/help, is beam sculptor 3d from james stewart (laser visuals,uk)....any suggestions from you guys for improvements welcome........all for now ........dave
    Lasever units


    bottom layer


    top layer with psu's


    beams 1 (with theatrical smoke)


    beams 2 (with theatrical smoke)


    father xmas (came late but got here eventually)
    dave321

  2. #2
    Join Date
    May 2006
    Location
    Norway, Fauske
    Posts
    1,206

    Default

    Nice!! Con grats!
    I want that also!!!

  3. #3
    Join Date
    Jan 2006
    Location
    S.E. Florida
    Posts
    483

    Default

    Very cool, Welcome to the RGB club!
    "Gravity its not just a good idea its the law"

  4. #4
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Thumbs up

    That's a very nice set up you got there. Very nice color. I would have thougt that much green would wash out the blue.
    Love, peace, and grease,

    allthat... aka: aaron@pangolin

  5. #5
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,648

    Default

    awsome i wish i could afford some optics and adjustable mounts
    Eat Sleep Lase Repeat

  6. #6
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,702

    Default

    Looks great Dave
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

  7. #7
    Join Date
    May 2006
    Location
    Native Floridian
    Posts
    3,131

    Default

    Hi Dave, very nice setup! If you don't mind, I'd like to make a suggestion. I also have a similar setup with the three lasever units:

    I had a bit of an issue using the DC power supplies that came with them, so I replaced the three power supplies with a single 5V 20amp supply from Jameco: http://www.jameco.com/webapp/wcs/sto...61&pa=201961PS

    Its quite a few amps overkill, but I also use it to power my shutter and a few other support circuits. And it cleared up the power problem I had.

    David

  8. #8
    Join Date
    Oct 2006
    Location
    Austria
    Posts
    60

    Default

    Hi!

    Can you tell me the beam specs of the red lasever unit??? mW and beamdiameter at the aparture. Because the red ones are cheap....

    Best regards
    Karl

  9. #9
    Join Date
    Jan 2007
    Location
    Yorkshire, UK
    Posts
    4,585

    Default

    David (DZurcher)

    Whose Optics mounts are those that you are using? They look nice and robust, I take it they are fully adjustable also?

    Cheers

    Jem

  10. #10
    Join Date
    Oct 2006
    Location
    Austria
    Posts
    60

    Default

    Other question...

    Why don`t you insulate the laserheads from the plate? I thought they get damaged when you don`t insulate them..... I hope you understand me....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •