Results 1 to 3 of 3

Thread: CL2X Wire

  1. #1
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,202

    Default CL2X Wire

    Wire question... can 24 AWG solid CL2X wire be used for wiring things like flexmods? I accidentally picked some up at Radio Shack based on the colors of the sheathing and not paying attention to the fact it was solid wire and not stranded.

  2. #2
    Join Date
    Apr 2007
    Location
    Costa Rica
    Posts
    523

    Default

    It will work fine but longer pieces will eventually break from vibration before stranded wire would. If you're only talking a few inches I think it will be OK. I used to use a lot of solid telephone hookup wire with perf board projects. The main thing is DO NOT NICK THE WIRE WHEN STRIPPING! The stripper should cut almost through the insulation but not touch the wire.

  3. #3
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    9,890

    Default

    It has to be where it will NEVER flex. If you use it in a projector, It must be tied down with wire ties etc. Ma Bell assumes it will not be moving when they use it. It will most likely break at the solder joint if allowed to flex or move. It work hardens at the joints, where its screwed down, or where its nicked (see above post) and breaks there.

    Steve
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •