Page 1 of 5 12345 LastLast
Results 1 to 10 of 45

Thread: GM20, G120PD, MM1, MM2, Machida, Fibers, Pwr Meters, DMX, Tesla Coil, Lumia, more...

  1. #1
    Join Date
    Apr 2007
    Location
    Costa Rica
    Posts
    523

    Default GM20, G120PD, MM1, MM2, Machida, Fibers, Pwr Meters, DMX, Tesla Coil, Lumia, more...

    THE SALE IS CLOSED - THANK YOU ALL!

    Prices do not include shipping. PM me for quote. Sale ends Tuesday night 7/22. Thanks for looking!

    Logic Systems DMX0602A-DRV
    DMX decoder to 8 op-amp driven channels. Power Supply: ±15VDC to ±24VDC @ 4A maximum, can also be used with a single ended supply
    Analog outputs: 6 current controlled with individually adjustable gain, offset, and damping and 2 voltage controlled jumper selectable for PWM or DC operation with individually adjustable gain. All outputs rated at 500mA each. Includes wiring harness for GM20's, power supplies and documentation. $100 SOLD
    Click image for larger version. 

Name:	IMG_0022.JPG 
Views:	15 
Size:	2.69 MB 
ID:	43971

    Spectra-Physics ion laser resonator alignment toolkit. All the allen drivers with handles and small wrenches needed to do a plasma tube/resonator/cavity alignment on SP 164, 165, 171 ion lasers. If you're trying to do this with just two allen wrenches, this toolkit will make it so much easier! $50 SOLD
    Click image for larger version. 

Name:	IMG_0019.JPG 
Views:	20 
Size:	2.41 MB 
ID:	43972Click image for larger version. 

Name:	IMG_0017.JPG 
Views:	11 
Size:	1.79 MB 
ID:	43973

    High Power dual terminated fiber optic beam delivery system. Precision Projection Systems fiber launches, NRC MM1 positioners and 50-50 beam splitter mounted on a black anodized breadboard. Suitable for installing on Laserscope KTP-Yag or high power argon and krypton lasers. 200 micron fiber (2 x 150' lengths) easily handles 20 watts. Includes low divergence output couplers with projector mounts. $750 NOW $700
    Click image for larger version. 

Name:	IMG_0033.JPG 
Views:	27 
Size:	2.37 MB 
ID:	43974

    Fiber launch input coupler, Precision Projection Systems PPS, for connectorized fibers, coated achromat lens. $200 NOW $175
    Click image for larger version. 

Name:	IMG_0035.JPG 
Views:	12 
Size:	2.23 MB 
ID:	43975Click image for larger version. 

Name:	IMG_0036.JPG 
Views:	8 
Size:	1.98 MB 
ID:	43976

    Newport Research single cleaved fiber optic beam delivery system. NRC FP-1A fiber positioner (new), 10X objective input lens, fiber chucks, output coupler/collimators (2 sizes), 100' Belden type 220001 200 micron fiber optic, blue PVC jacket. Two systems available. $100ea SOLD
    Click image for larger version. 

Name:	IMG_0040.JPG 
Views:	17 
Size:	2.49 MB 
ID:	43977

    Electro-Technic BD-10A high frequency generator (tesla coil) for testing integrity of laser plasma tubes and locating pinhole leaks. Adjustable 20KV-50KV. Like new. $120 SOLD
    Click image for larger version. 

Name:	IMG_0021.JPG 
Views:	4 
Size:	2.31 MB 
ID:	43978

    Synrad Power Wizard PW-250 laser power meter with box, measures up to 250W. Accidently inserted the wrong end into the laser beam the first day I had it when brand new. Functions perfectly. Small spot on display does not affect operation - just adds character! I paid $850 - yours for less than half. Includes original box, manual, declaration of conformity. $350 SOLD
    Click image for larger version. 

Name:	IMG_0013.JPG 
Views:	13 
Size:	2.59 MB 
ID:	43979Click image for larger version. 

Name:	IMG_0011.JPG 
Views:	6 
Size:	2.21 MB 
ID:	43980Click image for larger version. 

Name:	IMG_0014.JPG 
Views:	9 
Size:	2.00 MB 
ID:	43981

    United Detector Technology 40X Opto-Meter laser power meter. Measures CW power or pulsed energy. I am original owner and kept the instrument in perfect condition - used to evaluate audience scanning levels for my CDRH audience scanning variance. Measures 10 microwatts to 10 milliwatts. BNC output for scope viewing of pulses. Includes padded carrying case, manual, schematics, calibration and compliance certificate, photometric, radiometric, diffuser filters and a 7mm aperture for eye-safe measurements. Analog meter with fast response very useful for peaking optical systems, polarized laser diode orientation with wave plates, etc. $350
    Click image for larger version. 

Name:	IMG_0016.JPG 
Views:	10 
Size:	2.20 MB 
ID:	43982Click image for larger version. 

Name:	UDT40Xa.jpg 
Views:	7 
Size:	1.16 MB 
ID:	43983Click image for larger version. 

Name:	UDT40Xb.jpg 
Views:	7 
Size:	1.43 MB 
ID:	43984Click image for larger version. 

Name:	UDT40Xc.jpg 
Views:	6 
Size:	2.23 MB 
ID:	43985Click image for larger version. 

Name:	UDT40Xd.jpg 
Views:	6 
Size:	1.21 MB 
ID:	43986

    KTP crystals (2), leftover from my fleet of Laserscopes. Look new. AR coatings perfect. No burns, scratches or grey tracking. Both for $250 SOLD
    Click image for larger version. 

Name:	IMG_0027.JPG 
Views:	9 
Size:	3.36 MB 
ID:	43987Click image for larger version. 

Name:	IMG_0026.JPG 
Views:	7 
Size:	2.32 MB 
ID:	43988

    Machida Diffraction Gratings (2), linear, 50 micron and 20 micron. The real deal. Genuine Machida gratings with original boxes - not the imitation "machado" gratings. 170 degree fan of beams. Can handle high power - multiwatts. They are a centimeter square with 5mm grating area. My last ones - maybe your last chance in this lifetime to get one of these legendary gratings. Each grating will include an expensive gear-driven rotary mount the size of a 35mm slide with an index hole (for motorized systems to return to home position). I believe I was using the 20 micron Machida with a 20W argon laser on Kiss. $150 each BOTH MACHIDAS SOLD
    Click image for larger version. 

Name:	IMG_0055.JPG 
Views:	12 
Size:	2.30 MB 
ID:	43989Click image for larger version. 

Name:	IMG_0061.JPG 
Views:	12 
Size:	2.40 MB 
ID:	43990Click image for larger version. 

Name:	IMG_0056.JPG 
Views:	17 
Size:	2.53 MB 
ID:	43991Click image for larger version. 

Name:	IMG_0062.JPG 
Views:	19 
Size:	2.25 MB 
ID:	43992Click image for larger version. 

Name:	kisshits2.jpg 
Views:	33 
Size:	321.8 KB 
ID:	43993

    Machado-type linear gratings - the poor man's Machida. 1" squares. 4 for $50 SOLD
    Click image for larger version. 

Name:	lingrat.jpg 
Views:	28 
Size:	116.8 KB 
ID:	43950Click image for larger version. 

Name:	lingrat2.jpg 
Views:	27 
Size:	172.5 KB 
ID:	43951Click image for larger version. 

Name:	lingrat3.jpg 
Views:	20 
Size:	195.3 KB 
ID:	43952

    G100PD, G120PD, G120PDT closed loop scanners by General Scanning (6) units with XY mount and XYBlanking mount. Sold working as-is. Six scanners and two mounts - $300 SOLD
    Click image for larger version. 

Name:	IMG_0007.JPG 
Views:	42 
Size:	2.06 MB 
ID:	43967

    GM20 rotary actuators by General Scanning. (4) units mounted in a color box. Will include (4) mounts so you can use them singly and also an assortment of flags with CMY dichros. $200
    Click image for larger version. 

Name:	IMG_0008.JPG 
Views:	16 
Size:	2.63 MB 
ID:	43963Click image for larger version. 

Name:	IMG_0009.JPG 
Views:	8 
Size:	1.94 MB 
ID:	43964Click image for larger version. 

Name:	IMG_0010.JPG 
Views:	10 
Size:	2.14 MB 
ID:	43965

    GM20 rotary actuators by General Scanning. (2) units with mounts and flags. $100
    Click image for larger version. 

Name:	IMG_0025.JPG 
Views:	10 
Size:	2.64 MB 
ID:	43966

    GM20 quad drivers. Four channel drive cards for GM-20 actuators. Each channel has adjustments for gain and offset. Requires +/- 12-18VDC power supply. Can deliver up to 3.5A per channel. Supplied with 0.5A fuses. These are great for optical tables, safety shutters, color flags and open loop XY scanning. Can also be used to drive motors. Can be setup to pull GM-20 flag out for 0V signal and push flag in with 5V for fast and bounce free performance. If you are handy with a soldering iron you can save $$ by assembling the board yourself (it helps to have an oscilloscope for calibration). Measures 3.25"x5.25". Built and tested - $90ea. Kits with PC board, all components, heatsinks, layout diagram, schematic and parts list. - $50ea.
    Click image for larger version. 

Name:	crm114j.jpg 
Views:	17 
Size:	23.9 KB 
ID:	43948Click image for larger version. 

Name:	crm114a.jpg 
Views:	16 
Size:	16.1 KB 
ID:	43949

    Direct Vision Prism Amici. 70mm x 20mm x 20mm. Very rare unusual prism for widely dispersing laser lines without deviating from the optical path. $100 SOLD
    Click image for larger version. 

Name:	IMG_0024.JPG 
Views:	6 
Size:	2.44 MB 
ID:	43953Click image for larger version. 

Name:	IMG_0023.JPG 
Views:	14 
Size:	1.86 MB 
ID:	43954

    Newport MM-1 mirror mounts. 1" square. 8 available. 4 for $100 MM-1's SOLD OUT
    Click image for larger version. 

Name:	mm1sa.jpg 
Views:	18 
Size:	265.9 KB 
ID:	43955

    Newport MM-2 mirror mounts. 2" square. 6 available. 3 for $100 NOW 4 for $100
    Click image for larger version. 

Name:	IMG_0044.JPG 
Views:	7 
Size:	1.88 MB 
ID:	43956Click image for larger version. 

Name:	IMG_0043.JPG 
Views:	8 
Size:	2.32 MB 
ID:	43957

    Deadel mirror mounts, 1" square. Most have broadband dielectric high power mirrors - easily removed with a heat gun. I can remove them if you like. 13 units - $260 SOLD
    Click image for larger version. 

Name:	IMG_0068.JPG 
Views:	16 
Size:	2.68 MB 
ID:	43958Click image for larger version. 

Name:	IMG_0065.JPG 
Views:	14 
Size:	2.11 MB 
ID:	43959Click image for larger version. 

Name:	IMG_0067.JPG 
Views:	17 
Size:	2.61 MB 
ID:	43960

    Ledex rotary solenoids (5) Model H-2744-032, 1" dia x 1/2" thick, 2 are new in box, 3 are mounted and like new. Includes 5 flags. $75 NOW $70
    Click image for larger version. 

Name:	IMG_0037.JPG 
Views:	11 
Size:	2.30 MB 
ID:	43961Click image for larger version. 

Name:	IMG_0038.JPG 
Views:	9 
Size:	2.52 MB 
ID:	43962

    Lumia "torture tube", one of a kind, hand made, pyrex, 1" dia x 2.75" long (2" dimple area). Includes mount for 1/8" motor shaft (fits Hankscraft motor) The best mindblowing lumia! $100 SOLD
    Click image for larger version. 

Name:	IMG_0053.JPG 
Views:	28 
Size:	2.21 MB 
ID:	43968Click image for larger version. 

Name:	IMG_0051.JPG 
Views:	26 
Size:	1.83 MB 
ID:	43969Click image for larger version. 

Name:	IMG_0052.JPG 
Views:	16 
Size:	1.89 MB 
ID:	43970

    All items used and in good condition unless otherwise noted. Feel free to make an offer on anything. Proceeds benefit my retirement and help me pay some unexpected medical bills. Items will ship from the US. PayPal accepted. Thanks for looking!
    THE SALE IS CLOSED - THANK YOU!
    Last edited by Photonbeam; 07-22-2014 at 19:14. Reason: Marking items sold.

  2. #2
    swamidog's Avatar
    swamidog is online now Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,752

    Default

    interested in the prism. is it AR coated? and the daedel mounts.
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  3. #3
    Join Date
    Apr 2007
    Location
    Costa Rica
    Posts
    523

    Default

    Quote Originally Posted by swamidog View Post
    interested in the prism. is it AR coated? and the daedel mounts.
    I don't think the prism is coated. It's lossy compared to a Brewster angle dispersion prism but wow does it ever spread the laser lines out in a short distance. I used them before PCAOM's to pick off RYGB lines from a krypton for four sets of scanners in a compact optical system. I used the reflected beam off the prism face for lumia or gratings. Genesis (the band) had a projector around 1977 that sent all lines ar/ky to the scan head and had a drop-in direct vision prism to allow single colors to be sent to the scan head without a lot of extra steering mirrors.
    Here's one on eBay.

  4. #4
    Join Date
    Jun 2012
    Location
    Bree North West, Middle-Earth
    Posts
    298

    Default

    Hi,

    I'll take the DMX board, the torture tube and also the alignment tool set. Can you PM the price of shipping to the UK. I assume it should not be too expensive?

    Cheers

    Steve

  5. #5
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,202

    Default

    Hi Steve,

    I think I'm in for the meter and Ledex solenoids although I have a couple questions I need to PM you once my eyes are open enough and I've had the first cup of coffee. (I just woke up to see this.)

    Edit - the United one.


    Edit 2 - actually perhaps both meters.
    Last edited by Bradfo69; 07-16-2014 at 02:10.

  6. #6
    Join Date
    Apr 2008
    Location
    New Orleans
    Posts
    286

    Default

    I'm interested in one of the machida gratings & rotator. PM Sent.

    Thanks,
    Eric in New Orleans

  7. #7
    Join Date
    Jan 2011
    Location
    Santa Cruz, CA
    Posts
    309

    Default

    Put me down for the other Machida and the Tesla coil. PM incoming.

    -Sal

  8. #8
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,648

    Default

    would you accept $50 for the Direct Vision Prism?
    Eat Sleep Lase Repeat

  9. #9
    swamidog's Avatar
    swamidog is online now Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,752

    Default

    ok. i'll take it and the daedel mounts.

    Quote Originally Posted by Photonbeam View Post
    I don't think the prism is coated. It's lossy compared to a Brewster angle dispersion prism but wow does it ever spread the laser lines out in a short distance. I used them before PCAOM's to pick off RYGB lines from a krypton for four sets of scanners in a compact optical system. I used the reflected beam off the prism face for lumia or gratings. Genesis (the band) had a projector around 1977 that sent all lines ar/ky to the scan head and had a drop-in direct vision prism to allow single colors to be sent to the scan head without a lot of extra steering mirrors.
    Here's one on eBay.
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  10. #10
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,202

    Default

    I'm going to kick myself if I don't add the 4 machado's for $50 however... are they really machados or, are they machado "like" without the really wide spread? In two pictures, it "looks" like a proper machado - the one with the colored beams and green beams. In the one with the red beams and being hled by the hemostat, it looks more like the denser fan grating from a Mobolaser that doesn't necessarily spread out that far. If it's the machados, I'm "in".

    Ugh... why did you have to post all these goodies right before SELEM? I'm trying to get OTHER stuff in time for SELEM damnit! LOL

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •