Page 1 of 3 123 LastLast
Results 1 to 10 of 30

Thread: Laser kit clear out!

  1. #1
    Join Date
    Dec 2007
    Location
    Nottingham, UK
    Posts
    2,845

    Default Laser kit clear out!

    Evening all

    We're having a little bit of a clear out at the office and created a fairly chunky pile of kit which is either no longer used on jobs, or in need of a little TLC + repair.
    I thought I'd post the first lot of some of the "bigger bits" here, and then add the next batch of other components / parts / bits later when we've had a time to document, test and power up the lot.

    But for now here goes:

    I want to stick fairly firmly to indicated prices, that said, PM's with interest on said parts are welcome as ever.
    All parts sold as documented below, no returns or warranty supplied with any sale.
    Payment via BACS or PayPal; if the latter, add 3.4% to cover fees.

    Postage is to be added at exact cost of whatever service used; I'd obviously prefer collection from Nottingham as it guarantees parts get to the owner safe and sound.
    International postage welcomed, again, at whatever cost we get charged.



    Kvant - Jenlas D2 532nm Laser Projector
    £SOLD



    This has been one of the best lasers we've ever had, and it's a really sad day to let it go; very painful
    The Jenlas at the heart of it = amazing; I can't explain all the differences of a D2 head compared against a cheap 3-4W head; no contest. Metered at 4.25W out of the laser; power reading taken from the scanners not taken.
    CT 6215H scanners are in suberb condition with a suitably nice PSU to drive them.



    Stanwax 3W 532nm Laser Projector
    £SOLD

    A well built Stanwax laser projector with 3W Laserwave head inside; it's served us well this thang.
    However is now missing scanners and PowerCon connector.
    The Laserwave head is doing a hair over 2W; does not like very cold conditions but works well when nice and cosy.





    Stanwax 4W 532nm Laser Projector
    £SOLD

    Another of Sir. Stanwax's projectors.
    This one has a dead X-axis galvo though; fairly certain they are an older set of DT-40's.
    The Viasho 4W module is down in power, only outputs 720mW.
    Minor case scuffs.





    Stanwax Shoebox 1W 532nm Laser Projector #1
    £SOLD

    Like brand new inside! A testament to Rob's design and nice sealing + airflow management.
    The outside of the case has had quite a lot of scuffs / well used.
    The laser module (1W Laserwave) is down on power, and outputs 230mW. There is also a mirror missing from the X-axis galvo (DT-40's).





    Stanwax Shoebox 1W 532nm Laser Projector #2
    £SOLD

    Similar to the above. However very low green power <5mW. Scanners (DT40's) work fine.
    The outside of the case has had quite a lot of scuffs too.





    CNI 2W Laser Module
    £SOLD

    A CNI 532nm, originally labelled as a 2W head + driver, is in need of alignment. Plenty of IR bouncing around, just needs time spending to align it I think. Currently outputs around 70mW.





    Laserwave 300mW Laser Module
    £SOLD

    There is a small burn on the KTP, should output 300mW, currently <5mW. No driver.





    Black Flightcase
    £SOLD

    Two available, external Dims: 540x505x405mm.





    Silver Flightcase
    £SOLD

    One available, external Dims: 470x505x395mm



    CT 6800H X+Y Galvos
    £SOLD

    Pair of CT 6800H galvos on aluminium posts, no driver, X+Y mirrors attached and the coatings look in good condition. Bearings "feel" fine.





    Synrad 250W Power Meter
    £SOLD

    Purchased recently from Steve, Photonbeam, but unfortunately it's not what I'm after.
    Suitable for high power YAG's, CO2 etc.
    Comes boxed with instructions. Burn mark on screen from when Steve had it... Ooops!







    More components to follow in the coming weeks.
    Any questions please get in touch via PM!

    Cheers,
    Dan
    Last edited by danielbriggs; 03-04-2015 at 14:57.
    - There is no such word as "can't" -
    - 60% of the time it works every time -

  2. #2
    Join Date
    Jun 2006
    Location
    Charlotte, NC
    Posts
    1,125

    Default

    Sent you a pm, thanks

  3. #3
    Join Date
    Dec 2007
    Location
    Denmark
    Posts
    115

    Default

    Hi Daniel.
    Just send PM. :-)

  4. #4
    Join Date
    Nov 2007
    Location
    SoCal / San Salvador / NY
    Posts
    4,018

    Lightbulb

    Quote Originally Posted by danielbriggs View Post
    ...Jenlas at the heart of it = amazing..no contest...
    +1.. I can vouch for the 'amazingality' of the Jenlas Greens.. We have them in our RGBs, and ya.. they Rock..

    Click image for larger version. 

Name:	DSLI_C8_Grn.JPG 
Views:	45 
Size:	92.0 KB 
ID:	45328 (..expanded-beam profile wink..) ..Aside from the beam-quality, even the older 'non-VCSEL' design (..not sure which one this is..) the modulation-linearity is quite clean, and never 'flakey'.. The newer-Gen VCSELs are deffo 'faster' (..you can really see a difference when doing super-subtle colors like 'sand' or 'nipple' or 'greyscales', etc..) but even the 'early-gen' Jenlas really are something to write home about..

    fwiw..
    j
    Last edited by dsli_jon; 11-06-2014 at 08:03.
    ....and armed only with his trusty 21 Zorgawatt KTiOPO4...

  5. #5
    Join Date
    Jan 2012
    Location
    Netherlands
    Posts
    22

    Default

    Hi Daniel,

    send you a pm!

    Thanks!

  6. #6
    Join Date
    Dec 2006
    Location
    Scotland
    Posts
    1,408

    Default

    oh oh ... new toys
    pm sent
    In the beginning there was none. Then came the light - #1 UKLEM - 2007
    BUY UK LEGAL LASER POINTER :: NEW - Blue 460nm Laser Pointers

  7. #7
    Join Date
    Jun 2012
    Location
    Bree North West, Middle-Earth
    Posts
    298

    Default

    Dan,

    If they have not been already spoken for interested in the flight cases. Will send a pm

    Cheers

    Steve
    Quote Originally Posted by Lasermad View Post
    oh oh ... new toys
    pm sent

  8. #8
    gashead's Avatar
    gashead is offline Admin Verified: Best Accent Ever(Tm)
    Join Date
    May 2009
    Location
    Burntisland, Scotland
    Posts
    899

    Default

    How did I miss this ?
    "The horizon leans forward offering you space, to place New steps of change"

  9. #9
    Join Date
    Dec 2006
    Location
    Scotland
    Posts
    1,408

    Default

    because you blinked , stuff sold in hours
    In the beginning there was none. Then came the light - #1 UKLEM - 2007
    BUY UK LEGAL LASER POINTER :: NEW - Blue 460nm Laser Pointers

  10. #10
    Join Date
    Dec 2007
    Location
    Nottingham, UK
    Posts
    2,845

    Default

    Part 2!

    A few more items to add to the sale thread:


    RGB Lasersystems 473nm Module
    £Offer

    Original spec was 500mW; but one of the modules (it's made from 2 internally combined, PBS'd) is slightly down. Currently outputs just over 400mW.
    This might be "ear marked" for Brad, as he expressed interested when I was threatening to sell it at the last sale; but if he doesn't want it, anyone is free to make an offer.




    Belkin F5L009 USB Network Hub
    £SOLD

    A network USB hub; tested years ago with FB3's + LivePro. Works, top plastic scratched.




    Module housing + 2x Module Lids + Connectors
    £Offer

    A Laserwave module house (unused) + 2 lids from the same module with fancy circular connectors attached.




    Neutrik Speakon Connectors
    £Offer

    8x Brand new Neutrik Speakon NL4FX-2 connectors; unused. Priced as pack, will not split.




    USB Pangolin SMS Modem
    £SOLD

    USB Modem for use with Pangolin SMS2Laser // LivePro Plugin. Worked last time used; sold as is.




    SkyHigh Pyro Controller
    £Offer

    Fully working pyro controller!




    4x GP320 Motorola Radios
    £120

    4x GP320 Motorola Radios + 4x Charging stations + adapters. Also includes 1x new earpiece.
    Works out at only £30 each - I don't really want to split these.
    Unsure of full battery history, as bought used; however all work well + charge.




    Milford Instruments 8 Channel DMX Relay Board
    £Offer

    Fully working Milford Instruments 8 Channel DMX Relay Board; used once.




    DT-30 Galvos
    £SOLD

    DT-30 Galvos, missing mirrors (replacement mirrors highly likely available from Rob "the Stanwax"), inc. amps, PSU (1A version), and cables.




    DT-40 Galvos
    £SOLD

    DT-40 Galvos, good working order, not much use on them at all. inc. amps, PSU (1A version), and cables. Bearings feel "clean".




    CT-6800HP
    £Offer

    A set of CT-6800HP's, inc. CamTech amps + PSU board. Not had them scanning (time constraints, so sold as untested). One axis feels very clean, the other axis feels some minor resistance / not completely smooth.




    Various Clamps
    £SOLD

    A variety of clamps; various brands.




    Small Laserwave Modules
    £SOLD

    Two modules, 1x red and 1x green.
    The red module was a 300mW 638nm, however the diode popped. I chucked in 700mW Oclaro diode, however haven't got time to properly align the unit; it just needs to go.
    Inside there are cylindrical correction lenses.
    Comes with a 300mW 532nm green, burn on KTP <5mW output; no driver too.





    As before, all prices exclude shipping + PayPal fees. Collection preferred (Nottingham), but happy to post worldwide at buyer's cost.
    Items described fairly, no refunds/returns on any product, all as-is.


    That's all for now.
    I think there will be 2 more "part sales" to follow.
    1 of mostly used flightcases, 1 of a plethora of LSCP components.
    Everything priced to go!
    Last edited by danielbriggs; 03-26-2015 at 01:57.
    - There is no such word as "can't" -
    - 60% of the time it works every time -

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •