Results 1 to 4 of 4

Thread: Lumonics HPM VM2 galvo

  1. #1
    Join Date
    Aug 2012
    Posts
    19

    Default Lumonics HPM VM2 galvo

    Hope you can help , I am reassembling my Lumonics Galvo and have misplaced the cable that goes from the input board to the X/Y Galvo drivers .

    does any one have a circuit diagram of the HPM Vm2 Galvo or know the pin connection details , so I can make a cable

    Thanks in Anticipation

    Peter
    Attached Thumbnails Attached Thumbnails 001.jpg  


  2. #2
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    9,890

    Default

    Quote Originally Posted by Joe21 View Post
    same question, hopefully there who can help..
    Cambridge Technologies inherited GSI Lumonics. That is where you will find your support.
    Call them, usually they are helpful.

    Steve
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  3. #3
    Join Date
    Aug 2012
    Posts
    19

    Default Lumonics HPM VM2 galvo

    Thanks Steve
    I contacted them prior to posting on the forum
    this was the reply

    Hi there,
    Unfortunately,
    This scanner has been obsolete for quite some time.
    Thanks VF


    any suggestions on who I should contact < I am in Australia and cant call

    peter

    Quote Originally Posted by mixedgas View Post
    Cambridge Technologies inherited GSI Lumonics. That is where you will find your support.
    Call them, usually they are helpful.

    Steve

  4. #4
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    9,890

    Default

    GO here:

    http://www.camtech.com/index.php?opt...d=87&Itemid=75

    See if the connectors line up with any of the VM series there, or in the product manual archive.

    Steve
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •