Results 1 to 8 of 8

Thread: Lasever LSR-PS-I diode driver

  1. #1
    Join Date
    Feb 2007
    Location
    Herts, UK
    Posts
    1,254

    Default Lasever LSR-PS-I diode driver

    If anyone has a copy of the instruction sheet for the Lasever LSR-PS-I, any chance they could email a copy to me at simonmls<at>hotmail<dot>com please?

    I need to get this laser working by Friday, and David at Lasever must be busy at the mo...

    It's the newer LSR-PS-I (SMD) version with 4 trim pots, not the older one with traditional components and 3 pots, from... say, a couple of years ago.

    Many thanks

    Pit.
    A little bit werrrr, a little bit weyyyyyy, a little bit arrrrgggghhh

  2. #2
    Join Date
    Feb 2005
    Location
    Switzerland
    Posts
    1,410

    Default

    I don't received any insctruction sheet with my Lasever... So I am interested to have it too (the function of each pot for example).

  3. #3
    Join Date
    Feb 2005
    Location
    Florida
    Posts
    802

    Default

    I have a three pot style drawing , sorry.
    It does have SMD parts tho..
    I assumed it was the new version as MechEng sent it down
    for repair.
    I didnt like it.
    If you must have it..PM me.
    Last edited by marconi; 04-10-2007 at 13:31.
    "My signature has been taken, so Insert another here"
    http://repairfaq.ece.drexel.edu/sam/laserfaq.htm
    *^_^* aka PhiloUHF

  4. #4
    Join Date
    Jan 2006
    Location
    S.E. Florida
    Posts
    483

    Default

    The six wires are for: red for LD+, black for LD-, yellow for TEC+, blown for TEC-, green and blue for thermistor.

    With this info you can find out which pot does what. I do know that the two pots near the end of the board are LD current and limit. The others must be for the Tec control.
    "Gravity its not just a good idea its the law"

  5. #5
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,702

    Default

    here you go!

    Dave
    Attached Files Attached Files
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

  6. #6
    Join Date
    Feb 2007
    Location
    Herts, UK
    Posts
    1,254

    Default

    Great stuff, thanks guys

    Pit.
    A little bit werrrr, a little bit weyyyyyy, a little bit arrrrgggghhh

  7. #7
    Join Date
    Feb 2005
    Location
    Switzerland
    Posts
    1,410

    Default

    Very useful, thanks all

  8. #8
    Join Date
    Dec 2005
    Posts
    25

    Smile

    Thank You,

    I needed this too !!!!! I don't know about you guys, but every time I order something from a Chinese manufacturer I never get any technical info. Correction, I got one instruction set (although it was in Chinese). On the plus side, I am getting really good at google'n stuff.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •