2.7-3.0W RED 637nm and 5.0-6.0W BLUE laser modules

[MIIKKKLLLL]

Hi guys,

I have 2x modules for sale :

1/ 2.7-3.0W RED module

• 16x 170mW single-mode laser diodes (HL63133DG)
• Each diode is protected with individual Lasorb
• Diodes drived by 3x Flexmod P3
• Hi-quality optics
• Active cooling with temperature regulation at 20°C
• Diodes coupling : collimation with 3.3mm FL lenses, each polarisation side has 2*4 beams knife edged then coupled with a PBS + waveplate.
• Beam properties : 4.5*5mm / 0.9mrad full angle
• Power : 2.7W nominal, can safely and easily reach 3.0W
• Beam height : 39mm (or 35mm without active cooling)
• Dave flexmounts
• Very low running hours, never used during an event
• Dimensions : 30*16*10cm
• Requested power supply : 12V/8A and 24V/2A
• Solid 10mm aluminium baseplate
• Complete antidust aluminium cover included

Beam quality is really good with these beautiful diodes !! For this module, you can go with or without active cooling as the heat generated by the 16x diodes are only a few Watts.





2/ 5.0-6.0W BLUE module

• 4x M140 laser diodes
• Each diode is protected with individual Lasorb
• Diodes drived by 1x Flexmod P3
• Hi-quality optics
• Active cooling with temperature regulation at 20°C
• Diodes coupling : collimation with 8mm FL lenses, knife edged 2 by 2 + PBS + waveplate, then beam corrected by prisms
• Beam properties : 4.5*5mm / 0.9mrad full angle
• Power : 5.0W nominal, can safely and easily reach 6.0W (and even more!)
• Very low running hours, never used during an event
• Beam height : 39mm
• Dave flexmounts
• Dimensions : 10*10*8cm
• Requested power supply : 12V/8A and 24V/2A
• Solid 10mm aluminium baseplate
• Cheap "OEM antidust" plastic cover included

Beam alignement at 15 meters with the 2x modules and a 4W green module:



I can supply 10/14/20mm (and other sizes) machined spacers to raise PT/DT scanners mounts. 2/5/10mm (and other sizes) spacers for CNI MGL-H and OEM-F are also available on request.






Open to REASONABLE offers !


PS : If you buy the 2x modules, you will receive 1x 12V/20A power supply and 1x 24V/5A power supply for free .

Thanks for reading,
Mike

[db3306]

pm sent


15 characters

[MIIKKKLLLL]

Hi all,

Modules are still available.

If this can help, I am looking for :
1700€ for the RED module including 16x single-mode 637nm diodes (bright red), and
800€ for the BLUE module including 4x 450nm diodes.

Feel free to PM me if you have questions .

[MIIKKKLLLL]

Prices have been revised downwards !

1550€ for RED module and

700€ for the blue module


Michael

[Bradfo69]

You keep making me look at this!! Damnit!

If something I'm expecting to come through in the next week or so happens, then I'll probably revisit discussions about the red. I'm going to need something to finish this partially completed build and this fits the bill even though it's physically much larger than I expected.

[MIIKKKLLLL]

Hi all,

Prices updated :

1450€ for RED module and

650€ for the blue module

They need a new home .

[MIIKKKLLLL]

Hi to all PL members, prices updated... again !

1350€ for the RED module and

550€ for the blue module



Combo : 1800€ for both !

[MIIKKKLLLL]

Update :

RED module : SOLD !

5-6W BLUE module : SOLD !