Results 1 to 8 of 8

Thread: 2.7-3.0W RED 637nm and 5.0-6.0W BLUE laser modules

  1. #1
    Join Date
    Aug 2010
    Location
    Belgium
    Posts
    295

    Laser Warning 2.7-3.0W RED 637nm and 5.0-6.0W BLUE laser modules

    Hi guys,

    I have 2x modules for sale :

    1/ 2.7-3.0W RED module
    • 16x 170mW single-mode laser diodes (HL63133DG)
    • Each diode is protected with individual Lasorb
    • Diodes drived by 3x Flexmod P3
    • Hi-quality optics
    • Active cooling with temperature regulation at 20°C
    • Diodes coupling : collimation with 3.3mm FL lenses, each polarisation side has 2*4 beams knife edged then coupled with a PBS + waveplate.
    • Beam properties : 4.5*5mm / 0.9mrad full angle
    • Power : 2.7W nominal, can safely and easily reach 3.0W
    • Beam height : 39mm (or 35mm without active cooling)
    • Dave flexmounts
    • Very low running hours, never used during an event
    • Dimensions : 30*16*10cm
    • Requested power supply : 12V/8A and 24V/2A
    • Solid 10mm aluminium baseplate
    • Complete antidust aluminium cover included


    Beam quality is really good with these beautiful diodes !! For this module, you can go with or without active cooling as the heat generated by the 16x diodes are only a few Watts.
    Click image for larger version. 

Name:	DSC_31060.jpg 
Views:	102 
Size:	114.4 KB 
ID:	45081 Click image for larger version. 

Name:	DSC_43910.jpg 
Views:	277 
Size:	155.6 KB 
ID:	45079
    Click image for larger version. 

Name:	DSC_43240.jpg 
Views:	136 
Size:	98.2 KB 
ID:	45076 Click image for larger version. 

Name:	DSC_45180.jpg 
Views:	137 
Size:	125.4 KB 
ID:	45077 Click image for larger version. 

Name:	DSC_45190.jpg 
Views:	119 
Size:	141.0 KB 
ID:	45078



    2/ 5.0-6.0W BLUE module
    • 4x M140 laser diodes
    • Each diode is protected with individual Lasorb
    • Diodes drived by 1x Flexmod P3
    • Hi-quality optics
    • Active cooling with temperature regulation at 20°C
    • Diodes coupling : collimation with 8mm FL lenses, knife edged 2 by 2 + PBS + waveplate, then beam corrected by prisms
    • Beam properties : 4.5*5mm / 0.9mrad full angle
    • Power : 5.0W nominal, can safely and easily reach 6.0W (and even more!)
    • Very low running hours, never used during an event
    • Beam height : 39mm
    • Dave flexmounts
    • Dimensions : 10*10*8cm
    • Requested power supply : 12V/8A and 24V/2A
    • Solid 10mm aluminium baseplate
    • Cheap "OEM antidust" plastic cover included

    Click image for larger version. 

Name:	DSC_66070.jpg 
Views:	126 
Size:	151.2 KB 
ID:	45074 Click image for larger version. 

Name:	DSC_66090.jpg 
Views:	146 
Size:	153.4 KB 
ID:	45075

    Beam alignement at 15 meters with the 2x modules and a 4W green module:
    Click image for larger version. 

Name:	DSC_45230.jpg 
Views:	146 
Size:	122.9 KB 
ID:	45080


    I can supply 10/14/20mm (and other sizes) machined spacers to raise PT/DT scanners mounts. 2/5/10mm (and other sizes) spacers for CNI MGL-H and OEM-F are also available on request.

    Click image for larger version. 

Name:	DSC_66190.jpg 
Views:	60 
Size:	112.2 KB 
ID:	45073




    Open to REASONABLE offers !


    PS : If you buy the 2x modules, you will receive 1x 12V/20A power supply and 1x 24V/5A power supply for free .

    Thanks for reading,
    Mike

    --- www.neodym.be ---

  2. #2
    Join Date
    Nov 2010
    Location
    Sweden
    Posts
    254

    Default

    pm sent


    15 characters
    2x 1W RGB(DT40 PRO)
    1x 4W RGB, Full diode (DT40 WIDE)
    2x 1W, 532nm(DT40 WIDE)
    1x ALC68 ArgonGasser with 8ch, PCAOM
    5xFB3SE, BEYOND

    In progress, 2x 2,5w RGB

  3. #3
    Join Date
    Aug 2010
    Location
    Belgium
    Posts
    295

    Default

    Hi all,

    Modules are still available.

    If this can help, I am looking for :
    1700€ for the RED module including 16x single-mode 637nm diodes (bright red), and
    800€ for the BLUE module including 4x 450nm diodes.

    Feel free to PM me if you have questions .

    --- www.neodym.be ---

  4. #4
    Join Date
    Aug 2010
    Location
    Belgium
    Posts
    295

    Default

    Prices have been revised downwards !

    1550€ for RED module and

    700€ for the blue module


    Michael

    --- www.neodym.be ---

  5. #5
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,202

    Default

    You keep making me look at this!! Damnit!

    If something I'm expecting to come through in the next week or so happens, then I'll probably revisit discussions about the red. I'm going to need something to finish this partially completed build and this fits the bill even though it's physically much larger than I expected.

  6. #6
    Join Date
    Aug 2010
    Location
    Belgium
    Posts
    295

    Default

    Hi all,

    Prices updated :

    1450€ for RED module and

    650€ for the blue module

    They need a new home .

    --- www.neodym.be ---

  7. #7
    Join Date
    Aug 2010
    Location
    Belgium
    Posts
    295

    Default

    Hi to all PL members, prices updated... again !

    1350€ for the RED module and

    550€ for the blue module



    Combo : 1800€ for both !

    --- www.neodym.be ---

  8. #8
    Join Date
    Aug 2010
    Location
    Belgium
    Posts
    295

    Default

    Update :

    RED module : SOLD !

    5-6W BLUE module :
    SOLD !
    Last edited by MIIKKKLLLL; 02-11-2015 at 01:23.

    --- www.neodym.be ---

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •