Laser kit clear out!
Evening all
We're having a little bit of a clear out at the office and created a fairly chunky pile of kit which is either no longer used on jobs, or in need of a little TLC + repair.
I thought I'd post the first lot of some of the "bigger bits" here, and then add the next batch of other components / parts / bits later when we've had a time to document, test and power up the lot.
But for now here goes:
I want to stick fairly firmly to indicated prices, that said, PM's with interest on said parts are welcome as ever.
All parts sold as documented below, no returns or warranty supplied with any sale.
Payment via BACS or PayPal; if the latter, add 3.4% to cover fees.
Postage is to be added at exact cost of whatever service used; I'd obviously prefer collection from Nottingham as it guarantees parts get to the owner safe and sound.
International postage welcomed, again, at whatever cost we get charged.
Kvant - Jenlas D2 532nm Laser Projector
£SOLD
This has been one of the best lasers we've ever had, and it's a really sad day to let it go; very painful
The Jenlas at the heart of it = amazing; I can't explain all the differences of a D2 head compared against a cheap 3-4W head; no contest.Metered at 4.25W out of the laser; power reading taken from the scanners not taken.
CT 6215H scanners are in suberb condition with a suitably nice PSU to drive them.
Stanwax 3W 532nm Laser Projector
£SOLD
A well built Stanwax laser projector with 3W Laserwave head inside; it's served us well this thang.
However is now missing scanners and PowerCon connector.
The Laserwave head is doing a hair over 2W; does not like very cold conditions but works well when nice and cosy.
Stanwax 4W 532nm Laser Projector
£SOLD
Another of Sir. Stanwax's projectors.
This one has a dead X-axis galvo though; fairly certain they are an older set of DT-40's.
The Viasho 4W module is down in power, only outputs 720mW.
Minor case scuffs.
Stanwax Shoebox 1W 532nm Laser Projector #1
£SOLD
Like brand new inside! A testament to Rob's design and nice sealing + airflow management.
The outside of the case has had quite a lot of scuffs / well used.
The laser module (1W Laserwave) is down on power, and outputs 230mW. There is also a mirror missing from the X-axis galvo (DT-40's).
Stanwax Shoebox 1W 532nm Laser Projector #2
£SOLD
Similar to the above. However very low green power <5mW. Scanners (DT40's) work fine.
The outside of the case has had quite a lot of scuffs too.
CNI 2W Laser Module
£SOLD
A CNI 532nm, originally labelled as a 2W head + driver, is in need of alignment. Plenty of IR bouncing around, just needs time spending to align it I think. Currently outputs around 70mW.
Laserwave 300mW Laser Module
£SOLD
There is a small burn on the KTP, should output 300mW, currently <5mW. No driver.
Black Flightcase
£SOLD
Two available, external Dims: 540x505x405mm.
Silver Flightcase
£SOLD
One available, external Dims: 470x505x395mm
CT 6800H X+Y Galvos
£SOLD
Pair of CT 6800H galvos on aluminium posts, no driver, X+Y mirrors attached and the coatings look in good condition. Bearings "feel" fine.
Synrad 250W Power Meter
£SOLD
Purchased recently from Steve, Photonbeam, but unfortunately it's not what I'm after.
Suitable for high power YAG's, CO2 etc.
Comes boxed with instructions. Burn mark on screen from when Steve had it... Ooops!
More components to follow in the coming weeks.
Any questions please get in touch via PM!
Cheers,
Dan
Reply With Quote
Originally Posted by danielbriggs
or 'greyscales', etc..) but even the 'early-gen' Jenlas really are something to write home about.. 
....and armed only with his trusty 21 Zorgawatt KTiOPO4...
