-
CNI MGL F532 - 2W Laser head - Help
Hi
I asked CNI, they are normally nice to answer us, and reply with a datasheet. But asked twice without any answer from them.
I'm going to open this CNI F 532 - 2 watt head. (have IR glasses and a clean box with hepa filters).
- How much power to expect from the IR Diode ?
- How much Current is needed to run the diode ? (i checked the current now, and it's 4,6 amps)
The head only do 50 mw output of 532nm. I checked all surfaces on Vandate and KTP/LBO all looks fine.
Any experience here ? :-)
/Poul
http://www.photonlexicon.com/forums/...cons/lwarn.gif
-
I believe that there was 5W of 808. not sure though...
If the 808 gets 4.6A that's ok. If 808 works, then most probably the resonator is out of alignment.
-
CNI Are best friends when it comes to purchase , but when it comes to open up their units, they become transparent.
My furthest with them about opening the head was they asked me for my serial # of the unit, and never heard from them since ever , also reminded them but seems to be gone!
Problem was - 808nm diode kaputt, and I used my camcorder to pick up the IR light without me being exposed to it.
Do be very careful with 808nm , invisible danger!
Good Luck!
Philipp Wetter
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules