Results 1 to 5 of 5

Thread: kvant club maxx 3

  1. #1
    Join Date
    Jul 2008
    Location
    north carolina usa
    Posts
    218

    Default kvant club maxx 3

    high guys and gals new projector is giving me a fit when I adjust the y size the left goes down the right goes up soo what gives pics soon

  2. #2
    Join Date
    Sep 2009
    Location
    Brno, CZ / Povazska Bystrica, SK
    Posts
    491

    Default

    have you tried the invert x/y switches?

  3. #3
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,245

    Default

    More info required.

    What software and DAC are you using, where are you adjusting the geometry, etc, etc
    Frikkin Lasers
    http://www.frikkinlasers.co.uk

    You are using Bonetti's defense against me, ah?

    I thought it fitting, considering the rocky terrain.

  4. #4
    Join Date
    Jul 2011
    Location
    Atlanta Ga USA
    Posts
    425

    Default

    And a video might be helpful as well.

  5. #5
    Join Date
    Nov 2007
    Location
    SoCal / San Salvador / NY
    Posts
    4,019

    Lightbulb

    Hey Sir J -

    Quote Originally Posted by rgb-gas View Post
    ..when I adjust the y size the left goes down the right goes up soo what gives ..
    1. Check the 'common' connection(s) between yer scan-amps and +/- DC PS, feeding them (and the PS, itself..) Make-sure you've *got* solid +/- 24V (or whatever Kv is using, might be 28V, etc..) Output, on each leg.. Sound like a possible 'common-side leak' / bad-connex..

    2. Same for the ILDA-connex.. Make-sure there's no bad solder joints on the 'returns' (-) for X/Y, nor is anything 'shunting' / shorting them to anyplace else.. I'd also check any / all 'jumpers' used to route signals / power to/from PSs, and the ILDA I/Os, to the Amps..

    3. Are you using 'FA'? If-so, is it the 'ISA'-version? If so, I'd try replacing the lil' 1458 chip on the daughterboard.. I've seen those 'get squirrly' before, and not just 'outright fail', where it's obvious, with no-output at all.. If using QS or LD2K, etc, is the problem consistent with all softwares / DACs? Lettuce know..

    4. Oh, what Scanners / Amps are these, 506's w/ 'Happy Meal Amps'? If-so, I'd suspect the amps, themselves, also.. If none of the above fix the issue, perhaps contact the 'Amp-modder', etc.. If these are Kv OEM-Amps / Chivos, well.. Time to call yer Dealer..

    Para lo que vale..
    j
    ....and armed only with his trusty 21 Zorgawatt KTiOPO4...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •