Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Laser Scanning Tuning Target

  1. #1
    Join Date
    May 2008
    Location
    Westlake, OH
    Posts
    122

    Default Laser Scanning Tuning Target

    $15USD for the removable reusable adhesive fabric version, $10USD for 3 on plain Paper. Warning removable adhesive fabric signs from $2-6USD Paypal/bitcoin/cash Shipping is typically $5-6 in the USA (24in USPS Small Tube) OEM and resellers welcome. Printers is full color and branding and logos can be added. Other sizes are available up to 44" wide.

    Based on having to tune and make marks all over the walls.. on the road.. The 8 Degree boxes at several distances in either US Imperial Measurements or the Metric Target is 24" in size and offers from really close to 14' (4 meters) away. Target includes 16:9 and 4:3 aspect ration, Tick Marks in 1/4" or cm, on axis, 15" and 3 degree at 10m circles for pass calibration, as well as beam size measurements. I could not think of anything else to put on it! Please feel free to comment on suggestions or changes.



    Media:
    Removable Adhesive Fabric:
    Product is printed on a very durable removable Adhesive Fabric. This fabric will not damage most surfaces, and is re-usable. Dirt will stick to it and reduce it’s adhesive. I have friends that use it on their car, including the paint and it stays for months. Adhesive is good for 5 years.
    Plain Paper:
    Printed on a Quality bond paper, 3 24″ x 24″ targets are shipped for this one price. The Targets are folded and shipped in a standard Mailing Envelope. Rolled in Tube is available on Request for a Additional fee.

    All Laser Related Prints: https://www.tmtdigital.com/product-category/laser-show/

    Click image for larger version. 

Name:	laser-warning-cling-web-300x222.jpg 
Views:	10 
Size:	28.0 KB 
ID:	46406

    Click image for larger version. 

Name:	Scanner-Tuning-Target.jpg 
Views:	25 
Size:	76.5 KB 
ID:	46404

    Metric
    Click image for larger version. 

Name:	Laser-Tuning-Target-Metric.jpg 
Views:	20 
Size:	78.0 KB 
ID:	46405

    Shipping overseas can be expensive, a group buy might be in order as 1-5 cost about the same $10-15 to ship. I am working on someone printing them in EU to eliminate the overseas shipping problem.
    Last edited by rMuD; 02-23-2015 at 20:14. Reason: forgot things
    Rob Mudryk
    Retired old and Grumpy Laserist

  2. #2
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,202

    Default

    Received today. Thank you!

  3. #3
    Join Date
    Feb 2007
    Location
    Delaware USA
    Posts
    794

    Default

    Mine is on the way..

  4. #4
    Join Date
    Jul 2011
    Location
    Atlanta Ga USA
    Posts
    425

    Default

    Mine is on the way too.

  5. #5
    Join Date
    May 2008
    Location
    Westlake, OH
    Posts
    122

    Default

    Picture of last order shipped. a 22"x17" Danger adhesive print, USA target, next to a 8.5" x 11" danger sticker

    Click image for larger version. 

Name:	img_1235.jpg 
Views:	18 
Size:	1.51 MB 
ID:	46435
    Rob Mudryk
    Retired old and Grumpy Laserist

  6. #6
    Join Date
    May 2008
    Location
    Westlake, OH
    Posts
    122

    Default

    Added a few new products today. Inspired by Dr. Evil. Both Sharks with Lasers, as well as Mutated Ill-Tempered Sea Bass if the sharks in your area are endangered.

    Click image for larger version. 

Name:	Laser-Warning-Sign-Sea-Bass-Panel.jpg 
Views:	8 
Size:	145.7 KB 
ID:	46791 Click image for larger version. 

Name:	Laser-Warning-Sign-Shark-Dunn-panel.jpg 
Views:	14 
Size:	147.6 KB 
ID:	46792


    https://www.tmtdigital.com/product-category/laser-show/
    Rob Mudryk
    Retired old and Grumpy Laserist

  7. #7
    Join Date
    Apr 2006
    Location
    Miami, FL
    Posts
    3,590

    Default

    why 450-640? excludes 405/445 on the low end and 642/650/660/671 on the high end?

    your ANSI one is better at 405-670 but still would exclude 671... if you get a CDRH hard ass that 1nm could be a write up

    I think 400-700 would cover everyone

  8. #8
    Join Date
    May 2008
    Location
    Westlake, OH
    Posts
    122

    Default

    These are all print on demand, customer specified 450-640, that is what they use. You can have whatever you want.

    Quote Originally Posted by flecom View Post
    why 450-640? excludes 405/445 on the low end and 642/650/660/671 on the high end?

    your ANSI one is better at 405-670 but still would exclude 671... if you get a CDRH hard ass that 1nm could be a write up

    I think 400-700 would cover everyone
    Rob Mudryk
    Retired old and Grumpy Laserist

  9. #9
    Join Date
    Apr 2006
    Location
    Miami, FL
    Posts
    3,590

    Default

    Quote Originally Posted by rMuD View Post
    These are all print on demand, customer specified 450-640, that is what they use. You can have whatever you want.
    ah ok cool! I guess I missed that

  10. #10
    Join Date
    May 2008
    Location
    Westlake, OH
    Posts
    122

    Default

    FInally got the Forms function to work in the eCommerce. Here you go in all it's glory for Creating your Laser Danger Signs!

    ANSI/OSHA 2013
    https://www.tmtdigital.com/product/l...sha-compliant/

    Old School OSHA
    https://www.tmtdigital.com/product/l...red-compliant/

    Sharks, Sea Bass etc.. with option will be available soon!
    Rob Mudryk
    Retired old and Grumpy Laserist

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •