Results 1 to 6 of 6

Thread: FlexMod p3 interlock

  1. #1
    Join Date
    Mar 2015
    Posts
    1

    Default FlexMod p3 interlock

    Good Morning
    I purchased the card FlexMod p3 (interlock monitor output).
    Now I was trying to do the setup, but I always have the red LED on and no output, can not figure out how to maintain closed interlock.
    Can anyone help me

    thanks 1000

    Google translate

  2. #2
    Join Date
    Mar 2013
    Location
    Langhus - Norway
    Posts
    347

    Default

    The manual can be downloaded here:
    https://innolasers.com/shop/index.ph...roller=product

    It says: Iterlock must be connected to V+.

    This thread gives you a good idea of what and how.
    http://laserpointerforums.com/f51/ho...ser-56572.html
    __________________________________________________ __________

    More projects than time available.
    More projects started than finished.
    More money spent than earned.
    More failure than success.
    Just got to love lasers!

  3. #3
    Join Date
    Mar 2015
    Posts
    6

    Default

    Everything's already properly set up. The interlock light is pulsing on/off for a few times before it stays on.

  4. #4
    Join Date
    Mar 2015
    Posts
    6

    Default

    Everything's already properly set up, as can seen from the pictures. The interlock light is pulsing on/off for a few times before it stays on.

  5. #5
    Join Date
    Mar 2015
    Posts
    6

    Default

    Everything's already properly set up, as can seen from the pictures. The interlock light is pulsing on/off for a few times before it stays on.
    Also, my setup is different because of the modulation from arduino.

  6. #6
    Join Date
    Mar 2015
    Posts
    6

    Default

    I'm unsure what happened on this thread, could a kind mod remove my triple post?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •