Results 1 to 3 of 3

Thread: help connections

  1. #1
    Join Date
    Apr 2012
    Location
    Spain
    Posts
    133

    Default help connections

    I need help to connect modules laser and galvos (X - Y) to card STANWAX.
    I him attach images marked with numbers and letters, in order that you could say the correct form of connection to me.


    Modules it has two PIN (+-) as color (6 in total three colors), but the card STANWAX has 8 PIN.
    Galvos (PT-40k) take three PIN (Black-White-Red) as an axis (X - Y) total 6 PIN, but the card STANWAX has 5 PIN.


    Other one doubts that I have it is if I must connect the connection INTENSITY in some site.
    Do you think that this card is more suitable than PT-iTrust?
    I use PT-iTrust but I think that it is starting failing.

    Click image for larger version. 

Name:	2wg62k9.jpg 
Views:	21 
Size:	636.2 KB 
ID:	46616

    Click image for larger version. 

Name:	ip9oh5.jpg 
Views:	16 
Size:	444.3 KB 
ID:	46617


    Thank you very much in his time.
    Best Regards.




    Juan Manuel Montiel

  2. #2
    Join Date
    Mar 2013
    Location
    Langhus - Norway
    Posts
    349

    Default

    For the colors it`s quite stright forward. On Stanwax board The 1 and 2 is not used if you don`t have mechanical blancking (I did not use this.) The rest of the colours are corresponding the PT card.

    As for the Galvos, i am not a 100% shure, but from my mind, i seem to recall i did have to make Grounding common for both X and Y (The Black wire) and then use X-red the positive(+) and white on either side for the corresponding X and Y.

    You can switch this if you want to in order to mirror the output. Nice if you have two Projectors and only one DAK.
    __________________________________________________ __________

    More projects than time available.
    More projects started than finished.
    More money spent than earned.
    More failure than success.
    Just got to love lasers!

  3. #3
    Join Date
    Apr 2012
    Location
    Spain
    Posts
    133

    Default

    Thank you very much for the help.
    I will try with this configuration.

    Best Regards.
    Juanma.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •