Hello!
But I have a stock clearance, thats why I sell a lot of stuff.
1.)457nm 470mW CNI OEM-N-457 DPSS Laser with picodrive with fullbridge tec for very good stability. The diodecurrent runs about 20% under the specified current for warranty. Beamspecs : <3mm/<0.8mrad full angle
Stability <1% over 2 hours ! Analogue modulation (0-5V)
Runned less 80 hours!
http://images.dpss.at//img/datei_1427890710.JPG
http://images.dpss.at//img/datei_1427890436.JPG
2.)457nm 670mW CNI OEM-N-457 DPSS Laser with picodrive with fullbridge tec for very good stability. The diodecurrent runs about 20% under the specified current for warranty. Beamspecs : <3mm/<0.8mrad full angle
Stability <1% over 2 hours ! Analogue modulation (0-5V)
Runned less than 70 hours!
http://images.dpss.at//img/datei_1427890338.JPG
3.)457nm 2W CNI OEM-N-457 DPSS Laser, doing 2300mW with picodrive with fullbridge tec for very good stability. The diodecurrent runs about 20% under the specified current for warranty. Beamspecs : <3mm/<0.8mrad full angle
Analogue modulation (0-5V)
NEW! (just runned about 1hour!)
http://images.dpss.at//img/datei_1427892661.JPG
4.) 473nm 320mW CNI DPSS MBL-H-473, doing 330mW with picodrive with fullbridge tec for very good stability. The diodecurrent runs about 20% under the specified current for warranty. Beamspecs : <2mm/<1.2mrad full angle
Analogue modulation (0-5V)
Runned less than 150 hours!
http://images.dpss.at//img/datei_1427892495.JPG
5.) 470nm Nichia 25mW Laserdiode in housing with collimator. Runned just 5min for adjusting (NDHA210APAEI)
http://images.dpss.at//img/datei_1427892581.JPG
6.) 532nm 500mW CNI OEM-H-532 without drivers (if needed I can offer our drivers with these heads), used about 130hours
http://images.dpss.at//img/datei_1427890187.JPG
7.) 150pcs. 658nm Mitsubishi diodes (open can, long die)
http://images.dpss.at//img/datei_1427893279.JPG
8.) 80 pcs. Collimators F=4,2mm with housing (outer diameter = 11mm) for 5,6mm Diodes. AR coated 620-680nm. NEW. marco lauschmann germany.
http://images.dpss.at//img/datei_1427892848.JPG
9.) 18 pcs. used Collimators F=4,2mm with M9*0,5 thread. AR 620-680nm marco lauschmann germany.
http://images.dpss.at//img/datei_1427893005.JPG
10.) about 14 anamorphic prism pairs (some AR coated for 400-460nm / some are broadband AR coated)
http://images.dpss.at//img/datei_1427893123.JPG
It´s possible that I find some more parts, if yes, I will add them here.
I have a lot of other optics,scanningsystems and driver over here to.
I´m open for offers.
Best regards,
Phillip