Mobolazer ML-10 total rebuild

[VJ AIWAZ]

Here are some pics of a mobolazer i rebuilt that was submerged in sandy the electronics were shot and replaced with what you see here the motors were rusted solid and were also replaced







before rebuild.jpgafter rebuild .jpgDSC00191.jpgprts.jpgDSC00281.jpgDSC00332.jpgDSC00334.jpgDSC00308.jpg

[djeric68]

Good Job. Who makes the DMX decoder and motor drivers?

[hitekvoop]

Are you using full reflectors on all the mirrors? Doesn't look like much if any is getting by.

The Mobo's I've played with all have semi-silvered mirrors on the first 5 positions.

Did you salvage the logic board and motors from a scrap mobo or...?

[VJ AIWAZ]

the dmx board is from
http://lasershowparts.com/store/inde...d&productId=80

the motor drivers were from ebay dont remember from who but they were cheap (like $5 each)

in the video it may have cheap mirrors on actuators but they were replaced with better mirrors and 3 of them got 50/50's

as for the motors those were trashed but i still have the motherboard somewhere

[Bradfo69]

Heartbreaking though, as I'm sure the experience was, it's nice to see that it's being restored.

That looks to be a Viasho head? Let's hope that's not the second heartbreak. Viasho just simply scares me a bit.

[VJ AIWAZ]

yea i did this rebuild last year before my summer shows and it worked perfect
as far as this being a viasho it is but luckily it had problems a few weeks before sandy so it was out for repairs during the storm