Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: 457,473,488,532,561,658,671nm lasers,Optics,...

  1. #1
    Join Date
    May 2007
    Location
    Austria/Vienna
    Posts
    308

    Default 457,473,488,532,561,658,671nm lasers,Optics,...

    Hello!

    But I have a stock clearance, thats why I sell a lot of stuff.
    1.)457nm 470mW CNI OEM-N-457 DPSS Laser with picodrive with fullbridge tec for very good stability. The diodecurrent runs about 20% under the specified current for warranty. Beamspecs : <3mm/<0.8mrad full angle
    Stability <1% over 2 hours ! Analogue modulation (0-5V)
    Runned less 80 hours!
    http://images.dpss.at//img/datei_1427890710.JPG
    http://images.dpss.at//img/datei_1427890436.JPG
    2.)457nm 670mW CNI OEM-N-457 DPSS Laser with picodrive with fullbridge tec for very good stability. The diodecurrent runs about 20% under the specified current for warranty. Beamspecs : <3mm/<0.8mrad full angle
    Stability <1% over 2 hours ! Analogue modulation (0-5V)
    Runned less than 70 hours!
    http://images.dpss.at//img/datei_1427890338.JPG
    3.)457nm 2W CNI OEM-N-457 DPSS Laser, doing 2300mW with picodrive with fullbridge tec for very good stability. The diodecurrent runs about 20% under the specified current for warranty. Beamspecs : <3mm/<0.8mrad full angle
    Analogue modulation (0-5V)
    NEW! (just runned about 1hour!)
    http://images.dpss.at//img/datei_1427892661.JPG
    4.) 473nm 320mW CNI DPSS MBL-H-473, doing 330mW with picodrive with fullbridge tec for very good stability. The diodecurrent runs about 20% under the specified current for warranty. Beamspecs : <2mm/<1.2mrad full angle
    Analogue modulation (0-5V)
    Runned less than 150 hours!
    http://images.dpss.at//img/datei_1427892495.JPG
    5.) 470nm Nichia 25mW Laserdiode in housing with collimator. Runned just 5min for adjusting (NDHA210APAEI)
    http://images.dpss.at//img/datei_1427892581.JPG
    6.) 532nm 500mW CNI OEM-H-532 without drivers (if needed I can offer our drivers with these heads), used about 130hours
    http://images.dpss.at//img/datei_1427890187.JPG
    7.) 150pcs. 658nm Mitsubishi diodes (open can, long die)
    http://images.dpss.at//img/datei_1427893279.JPG
    8.) 80 pcs. Collimators F=4,2mm with housing (outer diameter = 11mm) for 5,6mm Diodes. AR coated 620-680nm. NEW. marco lauschmann germany.
    http://images.dpss.at//img/datei_1427892848.JPG
    9.) 18 pcs. used Collimators F=4,2mm with M9*0,5 thread. AR 620-680nm marco lauschmann germany.
    http://images.dpss.at//img/datei_1427893005.JPG
    10.) about 14 anamorphic prism pairs (some AR coated for 400-460nm / some are broadband AR coated)
    http://images.dpss.at//img/datei_1427893123.JPG

    It´s possible that I find some more parts, if yes, I will add them here.
    I have a lot of other optics,scanningsystems and driver over here to.

    I´m open for offers.
    Best regards,
    Phillip
    Last edited by Phritzler; 05-25-2015 at 13:15.

  2. #2
    Join Date
    Oct 2008
    Location
    France
    Posts
    548

    Default

    Hi ! Could you please tell me your price for two set broadband prims pair ?
    Mickael

  3. #3
    Join Date
    Jan 2012
    Location
    Netherlands
    Posts
    22

    Default

    Hi Phillip,

    Could you tell me your price for the 532nm 1W CNI OEM-H-532 without driver?

    Best regards,

    Vincent

  4. #4
    Join Date
    Mar 2015
    Location
    Cambridgeshire, England
    Posts
    478

    Default

    Hi, can you tell me how much you want for a pair of the 400 - 460nm anamorphic prisms?
    Thanks,
    Martin

  5. #5
    Join Date
    Mar 2007
    Location
    Portland Oregon
    Posts
    118

    Default

    Hi
    Can you tell me how much you want for the 561nm sapphire?

  6. #6
    Join Date
    Nov 2013
    Location
    St George UT
    Posts
    120

    Default

    I am interested in the 488 sapphire and the 473 CNI lasers, especially the 488. Price?
    Where are you located (for shipping estimate)?
    Thank you

  7. #7
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,202

    Default

    I'm very much interested in the 671. I have a projector ready to drop it into right now to replace a 671 with a quirky driver. 350mW is perfect too.

    May be interested in a couple of other bits - mainly a prism pair or two but, I'll study those more carefully in the morning.

  8. #8
    Join Date
    Mar 2013
    Location
    Langhus - Norway
    Posts
    349

    Default

    If two sets of prisms isn't to extensive, I am in for those. Please pm me the price.
    __________________________________________________ __________

    More projects than time available.
    More projects started than finished.
    More money spent than earned.
    More failure than success.
    Just got to love lasers!

  9. #9
    Join Date
    Mar 2015
    Posts
    2

    Default 473nm diode

    Hi,Phillip
    I am still searching 473nm diode, do you find any new item?

    Regards

  10. #10
    Join Date
    Jul 2005
    Location
    Tampa Florida
    Posts
    502

    Default

    Hi Philip,
    The Sapphire lasers are working fine! Thanks! Please update post with what is new for sale on the scientific end. Best, Phil
    Phil Bergeron( AKA 142laser)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •