Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Loads of laser stuff for sale

  1. #1
    Join Date
    Jan 2007
    Location
    Yorkshire, UK
    Posts
    4,559

    Default Loads of laser stuff for sale

    Hi all

    I just noticed a posting over on alt.lasers. This company has loads of stuff to clear out. Here's the posting and the link...

    *****************************************
    Hi all,

    Sorry for writing so much "for sale" adds to this group, but we
    are moving and any part I sell before moving will be one part less
    to move ;-)

    I have a few things which I want to sell:

    - ALC909 argon laser head (matching switching power supplies available, used
    and new tubes available)
    - Complete Lexel 88 turn-key systems (black, scientific version with
    switching power supplies and remote, most of them with brand new tube)
    - Tested and perfect working Coherent Enterprise, I-300 and I-300C power
    supplies
    - Tested and working Coherent Verdi / AVIA power supplies (different models
    available)
    - several Modelocking/Controllers for Tsunami and Mira fs lasers
    - several Coherent FAP, DUO FAP and QUATTRO FAP diode laser units (used and
    brand new), 690nm, 785nm, 808nm, 915nm available
    - several Coherent FAP-I modules (with several different diode power levels,
    used and brand new)
    - several power meters (Ophir, Coherent) and heads, used and brand new
    - several Advantest Q8384 OSAs (with fresh calibration and fresh system
    check by Advantest representative in Germany)
    - several 2GHz to 5GHz oscilloscopes
    - Spectra Physics 171 ion laser parts, also ONE brand new Krypton tube (I
    also have all other parts to do a complete system)
    - A.A PCAOMs used and brand new electronics (1, 4, 6, and 8 channel) and
    matching crystals
    - 2x Verdi 10 laser
    - 1x Millennia 5 laser (classic style)
    - several Melles Griot and Physik Instrumente 3 and 6 axis positioning
    systems (with piezo and motors and of course with controllers)
    - several Advantest Q8325 high precision wavelenght meters with fresh
    calibration and complete system check
    - several Novacure 2001 UV curing systems
    - several Thorlabs PROFILE LD/TEC conrollers with a large variety of LD/TEC
    and laser source plug-ins


    Ok, that is about 5% or even less of my stock right now....if anybody is
    interested, please send me an email via our website
    (sorry, website is absolutelly NOT up-to-date) or give me a call: 0049 831
    5204744

    Reasonable offers are welcome......"I will take it for free and even will
    pay the postage" offers not

    many greetings

    Florian

    --


    ABSee-Laser
    Florian Rotter
    Bischof-Hanebergstr.8
    87437 Kempten
    Germany
    Phone: +49 (0)831 5204744

    *********************************************

    http://www.absee-laser.com/scientific/index_e.html


    I have no connection at all with this company, I just thought some on the Forum may find the link useful. I've checked out their website and they have some pretty cool stuff.

    Cheers

    Jem

  2. #2
    Join Date
    Jan 2007
    Location
    Yorkshire, UK
    Posts
    4,559

    Default

    WooHoo.... Just done my 100th post

    Jem

  3. #3
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,677

    Default

    we have bought stuff off Florian a couple of years ago.

    I must say, he is a very honest character, and his gear is top quality
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

  4. #4
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,488,218

    Default

    Congratulatins on the 100 mark, JEM.

    I contacted Florian about 8 or 9 months ago after being referred to him by several people - both here and on alt.lasers. I asked him about the ALC 909 argon tubes he has. He has several of them, and the guy has a great reputation for refurbishing quality stuff, so I figured he'd be a good guy to ask about a possible replacement tube for my dead HGM 5 unit.

    Unfortunately, while his gear may be in top condition, so are his prices. He quoted me $2800 for a used (but refurbished) argon tube. That's the base price, before shipping or import duty. (Remember, he's in Germany.)

    I thanked him for taking the time to send me a reply, but I had to decline. At that price, I could have purchased a 1 watt DPSS green and had money left over... (Plus the DPSS laser would have run off 110V power and wouldn't need all the extra cooling that the argon would.)

    I'm not saying that, for the right medical buyer, that price woulnd't have been reasonable... All I'm saying is that for hobbyists, his prices are on the high end of what is usually expected.

    Edit: I have to agree with Dave though; the guy has a reputation for being very honest. Also, his e-mails were quite informative and friendly, even if his prices were beyond my reach.

    Adam
    Last edited by buffo; 05-06-2007 at 16:18.

  5. #5
    Join Date
    Jan 2007
    Location
    Yorkshire, UK
    Posts
    4,559

    Default

    I've just sent him an email regarding the price of a Coherent c315m 100mw 532nm DPSS Laser. These are brilliant for holography, very stable single mode. If the price is reasonable I may think about getting one to replace my ageing 10mw 532.8nm HeNe which i'm currently using to make holograms.

    Jem

  6. #6

    Default

    I like Florian, he's cool, very helpful. The only reason I'm not piling into that like a maiden aunt at a jumble sale is I haven't got any money on the scale needed even for one of those Ophir meters. The Verdi, mmm, the stuff of dreams, no?

  7. #7
    Join Date
    Jan 2007
    Location
    Yorkshire, UK
    Posts
    4,559

    Default

    Just had a reply from Florian.

    Alas, he has no Compass 315m's left

    I agree Doc, there's some tempting stuff on there.

    Jem

  8. #8
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,677

    Default

    Quote Originally Posted by Buffo View Post
    Unfortunately, while his gear may be in top condition, so are his prices. He quoted me $2800 for a used (but refurbished) argon tube. That's the base price, before shipping or import duty. (Remember, he's in Germany.)
    Wow, thats a pretty cheep 2w dpss
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

  9. #9
    Join Date
    Jan 2007
    Location
    Cupertino, California
    Posts
    2,130

    Default

    How much for the 690nM FAP unit? Used would be okay.
    CLICKY!!!

    Admin: In the immortal words of Captain Planet: YOU HAVE THE POWER
    Admin: (To quit being a bitch)

  10. #10
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,488,218

    Default

    Quote Originally Posted by dave View Post
    Wow, thats a pretty cheep 2w dpss
    You're right, Dave. I fat-fingered that one. Should have been 1 watt.

    (I edited the original to fix the typo)

    Adam

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •