Page 4 of 9 FirstFirst 12345678 ... LastLast
Results 31 to 40 of 83

Thread: New Diode

  1. #31
    Join Date
    Feb 2011
    Location
    New Hampshire
    Posts
    3,513

    Default

    Yes, that is the thread. THanks.

    I would not worry. The bottleneck is what it is and you won't change it. But, think about the thermodynamics going on there. If you want to run, say 4 diodes hard, then you're talking about removing 100W of waste heat. The base plate will represent another heat flow issue. I've cooled a lot of modules and when you try to dump 100 W into the base plate it gets warm. I have found that only liquid cooling can keep the base near room temperature. If you want to super-cool the diodes for EVEN MORE POWER then you will have to deal with hundreds of watts of waste heat from the base plate and nearly the same bottleneck at the diode flange. This is due to the TEC's. Only liquid cooling will prevent a significant temperature rise in this situation.

  2. #32
    Join Date
    Nov 2008
    Location
    Cleveland Ohio
    Posts
    2,613

    Default

    Time for flow through diode blocks with liquid cooling channels or jacketed diode blocks with indium to a large mass. At these powers is it really worth trying to squeeze the next drop out by cooling.

  3. #33
    Join Date
    Feb 2011
    Location
    New Hampshire
    Posts
    3,513

    Default

    A stout, copper diode mount through indium foil to a water cooling block is pretty hard to beat. Low cost, compact and effective, 25W through the 9mm diode's flange is not bad. Back of the envelope, 25 W through Dave's copper mount should result in about a 6C temperature rise from its base to the diode flange. These closed loop liquid CPU coolers will dump hundreds of watts for a few degrees temperature rise.
    Whether to throw in a TEC is a question. This will increase the output power I would guess by 10-20% (I'll know soon), but also adds several multiples of additional heat to deal with.

  4. #34
    Join Date
    Oct 2012
    Location
    Germany
    Posts
    1,550

    Default

    ... I have some water-cooled 405nm-LED's with an interesting heat-exchanger design - the small golden chip, containing the 18 diodes, is a sandwich from several ceramic an metal sheets, forming a labyrinth for the coolant.

    The diodes emits 9Watts@405nm when driven with 21 Amps ...

    Viktor
    Attached Images Attached Images

  5. #35
    Join Date
    Aug 2010
    Location
    London or Spain depending on the weather
    Posts
    1,390

    Default



    Very nice ! Where.d.ja get dat from?

    At least I got a water supply sorted http://www.photonlexicon.com/forums/...anguage-skills

    poke2.gif Wakey wakey Dave!...time to start drilling some holes in a copper mount or two !

    Cheers

  6. #36
    Join Date
    Jun 2007
    Location
    Monroe, Mi USA
    Posts
    818

    Default

    Added to track....Not all experimenters are ZZZZzzzz !!!! I have one coming to do some optical tinkering !!! Likely a candidate for C-Lenses 4 sure !!

    But...yes...I think our new Frontier may be the big Outdoor 10-100 watt projector !!! But...RED remains a real problem....NO breakthrough here !!!
    Beam Axiom #1 ~The Quantum well is DEEP ! Photons for ALL !!
    .
    Beam Axiom #2 ~Yes...As a matter of fact...I DO wear tinfoil on my head !!
    .
    Beam Axiom #3 ~Whe'n dout...Po ah Donk awn et !!
    .
    Beam Axiom #4 ~A Chicken in every Pot, and a Laser Lumia in every Livingroom !!
    .
    Beam Axiom #5 ~"Abstract Photonic Expressionism"....is "Abstractonimical" !!
    .
    Beam Axiom #6 ~ "A Posse ad Essea" ~ From being possible to being actual ...is the beam target !

  7. #37
    Join Date
    Oct 2011
    Posts
    209

    Default

    150 bucks can get you possibly 8-10 watts?? CDBeam you still sell those corrective optics don't you?

  8. #38
    Join Date
    Oct 2008
    Location
    France
    Posts
    548

    Default

    If red still a problem, finding a driver who can deliver more than 4A is a problem too !

  9. #39
    Join Date
    Oct 2012
    Location
    Germany
    Posts
    1,550

    Default

    ... I'm driving my diodes with up to 9Amps -- and the 405nm-LED's in my previous post needs up to 21Amps for full power ;-)

    As no omercial driver was available for under 1k€, I've built my own ...

    Viktor

  10. #40
    Join Date
    Feb 2011
    Location
    St. Louis
    Posts
    526

    Default

    Little new info. Got some images of the raw output compared to a NDB7A75. The NUBM44 is a thinner bar more concentrated and is definitely much bluer than the NDB7A75. I am waiting on a wavelength check but my guess is it is a 462nm diode.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •