Results 1 to 5 of 5

Thread: Projector Cases (testing the water)

  1. #1
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default Projector Cases (testing the water)

    im about to start machining some projector cases and I was thinking about making a few extra to sell, would anyone be interested?

    internal spaces is 250mm by 250mm, height of about 90-100mm

    sealed, so no fans or dust

    big ally heat sink is the base everything is mounted directly to, which is fan cooled.

    aperture mask, ilda in/out, power in/out, key switch, interlock, fuse, power, XY holes all cut.
    they are designed to mount one of robs ilda boards directly to the back panel

    4mm thick ally, so very strong and solid feel, they will be powder coated black

    not worked out a price yet

    heres the CAD image of it which isn't finished yet (the case wont have all the branding on it)



    although different, this is another one I did to give an idea of how a finished one will look





    Last edited by andy_con; 06-23-2015 at 05:00.
    Eat Sleep Lase Repeat

  2. #2
    Join Date
    Nov 2009
    Location
    Whanganui New Zealand
    Posts
    312

    Default

    I see that green lee make a chassis punch for the db25 connector.

  3. #3
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    i dont need a punch but thanks
    Eat Sleep Lase Repeat

  4. #4
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    Updated the first post with some photos of another case I made which gives a much better idea of what the case will look like
    Eat Sleep Lase Repeat

  5. #5
    Join Date
    Oct 2008
    Location
    France
    Posts
    548

    Default

    May be in for one or two pieces, as each time, depend of when available and the price.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •