Intensity

[juanma666]

Hello, friends.

Why does it serve the connection "intensity" of the board, where laser modules and the galvos connect?
To mount an analogical projector is this connection in use?



Best Regards.

Juanma.

[colouredmirrorball]

Intensity on an Ilda signal is the combination of red, green and blue signals. Depending on the source this signal can either be analog or TTL. Generally it's not used except when you only have one colour in the projector so you don't need to rerout your colour signals.

[juanma666]

Thank you very much for his response.

Best Regards.


Juanma.

[colouredmirrorball]

Spaghetti sets the Intensity output to either full on or full off depending on whether or not any of the colors have output. This is so that if someone has a TTL scanner that is only hooked up to Intensity they will get output. I am not sure if that is the best thing to do but since I haven't encountered anyone who uses it I am not worried about it.

Why is it so instead of an option to set it to TTL or analog?

[buffo]

Many PCAOM drivers (NEOS for sure, and I think AA as well) require a TTL input in addition to the analog color input in order to turn on. The Intensity signal accomplishes this.

Adam

[juanma666]

Hi, buffo.
These are my analog drivers, take an exit TTL also.

sshot-1.jpg

I have to connect intesity to the exit TTL; or only the connectors of analog in his corresponding place?


Best Regards.

Juanma.

[juanma666]

And this board of connection ILDA.

sshot-2.jpg


Best Regards.

Juanma.

[catalanjo]

thinking2.gifJust the analogue !
What colours do you have ?
Cheers

[juanma666]

Hello.

532nM/300mW
638nM/500mW
445nM/1000mW

Here it can see the process:

http://897524287421569307.weebly.com...acutegico.html


Best Regards.

Juanma.

[catalanjo]

Just a couple of things:
Pintar base = jpshakehead.gif conductividad termico aluminio = bueno, pintura =malo!
idea.gif Quitar pintura justo donde van los modulos laser, los soportes scanners y radiadors de la electronica !
!!!!!!!!!!!!!! oops.gif !!!!!!!!!!!!
No hay Obturador! 1800MW es mucha canya te puede dejar frito!

poke2.gif Imprescindible Obturador/Shutter ! sino shootself.gif

TEXTO:
Tarjeta de conexión con interfaz ILDA: "Su misión es conectar todo el cacharreo al D.A.C." = correcto!
thinking2.gif "para convertir la señal digital en analógica ". = El DAC es el convertidor no la tarjeta interfaz!
y de esta forma poder manejar sin problemas el software de show láser sincronizado con la música = OK

"a través de un sistema de audio Hi-Fi analógica" ????

Cheers
PS. Donde stas ?