Results 1 to 4 of 4

Thread: Hiatus under the LBO crystal

  1. #1
    Join Date
    Feb 2008
    Location
    Hungary
    Posts
    420

    Default Hiatus under the LBO crystal

    Hi,
    The green laser module is work good, but I little bit worried the LBO crystal of life time.
    LBO crystal does not fill on the plate well. This is hiatus and other side is skew.
    I attached the photos.
    The LBO house in the middle of a small aluminum plate is lifted.
    Questions: Proper cooling of the crystal now? Can I fill in the gaps? What about the skew position?
    What is the LBO optimal temperature?

    Thank you the tips,
    Attached Thumbnails Attached Thumbnails LBO.JPG  

    LBO_lbo.JPG  

    Last edited by whiteg; 07-14-2015 at 02:16.

  2. #2
    Join Date
    May 2012
    Location
    Russia
    Posts
    34

    Default

    What is the power of the laser module?
    Not every line is shorter than the curve.

  3. #3
    Join Date
    Feb 2008
    Location
    Hungary
    Posts
    420

  4. #4
    Join Date
    May 2012
    Location
    Russia
    Posts
    34

    Default

    500 mw - small power.
    But, if you are afraid of overheating сrystal, filling the space under the crystal house with thermally conductive adhesive.
    Not every line is shorter than the curve.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •