Results 1 to 8 of 8

Thread: trifield meter/emf meter

  1. #1
    Join Date
    Nov 2014
    Location
    mid michigan
    Posts
    792

    Default trifield meter/emf meter

    I was wondering if any one has plans or schematics for a trifield meter and/or EMF meter, I dont want to buy one but rather try and build one, and not nessealry for the gost hunting stuff but rather find stray or erroneous magnetic or electrical fields and have the ability to reject 60 and 120 hz when needed.

    the remade- devices are quite pricy and the kit from Ramsey i dont totally know about, i have played with one but am not impressed

    any info would be helpful

    thanks
    Polk SDA SRS, Parasound HCA 3500, Luxman M117, Onkyo 504, 7.62X39, sometimes a ball on a string is the greatest of toys for us nonhuman types. oh and some lasers, lots of lasers

  2. #2
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    9,468

    Default

    Trifield meters are generally poor instruments to begin with. Calibrating them is hell without special gear, better to buy something. IMHO, They really don't tell you anything that a high impedance, gazillion turn, shielded ferrite cored coil hooked an audio amplifier will not tell you.

    A well built, diode based, field strength meter rated to UHF will tell you the rest.

    Steve
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  3. #3
    Join Date
    Oct 2012
    Location
    Germany
    Posts
    1,310

    Default

    ... some +twenty years ago a friend and me developed an "E-smogman" for detecting/sensing electric and magnetic emission and 'show' it like a dose rate meter with rising clicks for stronger emission

    It was essentially a three-stage OPamp, that amplified the electrically induced micro-voltage in a short antennae wire to maybe 1:900 - the switchable 'magnetic sensor' was a small coil, but the same OPamps to get the amplified pulses.

    The overdriven output was then used to switch a LED and give some cracking noise onto a piezo disc ... no more complexity ...

    Viktor

  4. #4
    Join Date
    Nov 2014
    Location
    mid michigan
    Posts
    792

    Default

    Ok cool, my idea is basically a lot of wire around a core and sent to an amp as well or even an O-scope just to see what the spikes looked like, i guess for calibration i would not care that much about as the project was to just see the presence of a signal rather then knowing it's exact amplitude
    Polk SDA SRS, Parasound HCA 3500, Luxman M117, Onkyo 504, 7.62X39, sometimes a ball on a string is the greatest of toys for us nonhuman types. oh and some lasers, lots of lasers

  5. #5
    Join Date
    Nov 2008
    Location
    Cleveland Ohio
    Posts
    2,423

    Default

    if a ghost gives off EM can't you trap it with a strong magnetic bottle suck it right in busters style. then find its resonant frequency and blow it to pieces or suck down its energy with phase inversion. Trap enough of them and then run a coil through the trapped field to make them run your ipod.

  6. #6
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    9,468

    Default

    If Kecked keeps running his IPhone off spirit power he can expect
    a rare home visit from the EPA very shortly. If the EPA guy shows up, remind him "OFF" is not always off and for God's sake don't let him touch any circuit breakers. Remember to put up the "Qualified Electricians Only" sticker on the cicuit breaker too.

    LOL,

    STEVE
    Last edited by mixedgas; 08-26-2015 at 10:52.
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  7. #7
    Join Date
    Nov 2008
    Location
    Cleveland Ohio
    Posts
    2,423

    Default

    kecked takes a bow and smiles

  8. #8
    Join Date
    Nov 2014
    Location
    mid michigan
    Posts
    792

    Default

    Thats funny, it took a few min to get the reference from the gost busters movie
    Polk SDA SRS, Parasound HCA 3500, Luxman M117, Onkyo 504, 7.62X39, sometimes a ball on a string is the greatest of toys for us nonhuman types. oh and some lasers, lots of lasers

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •