Results 1 to 2 of 2

Thread: DMX - What is reasonable to expect?

  1. #1
    Join Date
    Feb 2015
    Posts
    7

    Default DMX - What is reasonable to expect?

    I have a laser scanner from CR Laser, and I've been playing around with the translation of patterns. From what I can tell 'by-eye' even though 128 values of a channel are described in the manual to be allocated to different fixed positions along an axis, only about 64 of these are used, and then the second 64 are just repeats.

    Is it likely that this is just how it is, or am I losing information between the controller and my scanner??

  2. #2
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,248

    Default

    What is your DMX controller? I would confirm you have full resolution from that part initially.
    Frikkin Lasers
    http://www.frikkinlasers.co.uk

    You are using Bonetti's defense against me, ah?

    I thought it fitting, considering the rocky terrain.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •