Hi all,
I fired up the lasers and found a slight issue with one of them. It is a LightSpace Venus II 2.9
There is a slight 'wobble' on the Y axis. This happens with ILDA or onboard signals. I have disconnected and reseated all connectors to do with the Y axis and the problem still persists.
It is very minimal but certainly detectable on static or slow moving images and is obviously intensified over distance. It is as if the laser is being held by hand and trying to be held steady.
I am have emailed Walt about this as they are or should be still under warranty but figured I'd reach out here to serif there is anything I can try.
Any suggestions?
Cheers
Rich