Results 1 to 4 of 4

Thread: Single zone mirrored in two projectors- BEYOND

  1. #1
    Join Date
    Oct 2015
    Posts
    17

    Default Single zone mirrored in two projectors- BEYOND

    Hello,

    Is possible assign the same zone, like hot beams and two projectors?

  2. #2
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,248

    Default

    If you want to use a single zone for 2 projectors then just connect both projectors to the same DAC.

    If you want to send output from one zone to another, then you can use the 'Also to...' tab and you can easily copy/paste zone settings to make them the same shape, etc. Note that hot beam zones often have a setting applied to prevent re-routing of output. This is to stop you setting an 'Also to...' and enduing up with hot beams in an audience zone. but this can be disabled IF YOU ARE CERTAIN IT IS SAFE.
    Frikkin Lasers
    http://www.frikkinlasers.co.uk

    You are using Bonetti's defense against me, ah?

    I thought it fitting, considering the rocky terrain.

  3. #3
    Join Date
    Jul 2011
    Location
    Atlanta Ga USA
    Posts
    425

    Default

    Also note if you are on 2.1, then you need advanced or ultimate for also to. This was a change from 2.0. To make hot beams safe you can go into the projection zone and hit the advanced tab and uncheck the box that prevents size and settings from effecting that zone. Then hot beams will only route in your "safe" areas.

  4. #4
    Join Date
    Oct 2015
    Posts
    17

    Default

    Thank you!! !!!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •