yes you have a meter movement - I would use a 10% beamsplitter going to a photo cell and make the meter move, use it for peaking because the photo cell is a fast response device, then I would use a calibrated meter to read output...you should be able to get the range switch to index as you gain power by peaking said laser...but yeah...for the most part mixedgass is correct...again...
sorry I forgot to add - the BNC connector is usually for connecting to a chart recorder.
Last edited by Laserman532; 12-19-2015 at 17:45.
Pat B
laserman532 on ebay
Been there, done that, got the t-shirt & selling it in a garage sale.