-
Catalanjo, If you're highlighting that quote to show you'd said it, I had seen it and double checked my wires against my notes. Sadly the notes were backwards and so I thought I had them right. 
The amp pin outs were supplied on a word document, and I'd written them on a seperate page with the other db25 pinouts and my currents for the diodes etc. Tried to consolodate everything in one place... live and learn I guess.
-
- looking at your first photo, the modulation input on the first driver seems to be very loose.
for color tuning:
-before tuning your diode drivers make sure optical alignment is perfect first.
-project your test patterns on a very dark gray or black surface. It is more peasant to look at. It makes better pictures. Your eyes will saturate less and will notice details better in the upper regions.
-Let the temperature of your projector stabilize. The lasing threshold current of your diodes is temperature dependent.
-Before adjusting your drivers, play around with the min/max levels in your projector settings, that way you can develop a feeling/plan what channels should be adjusted by how much.
-There are many grayscale test patterns, the standard QS/beyond, the one with the eight circles in a line, is a good one to start with.
-Enable the beam suppression as you last step.
-
Thx Bart. I had a bit of a play around last night with the alignment. Got the red and blue pretty much right, then went to green and due to the design of the mounting the top plate I couldnt really alter it easily, so I will need to do this again starting with the blue over green, then red.
I'll get there...
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules