cases

[edison]

Hello Guys

To keep the development proces going i decided to sell a few of the bigger cases that i have in stock. The case is 440 x 250 x 170mm. Its a splitlevel case with a massive heatsink in it. You can fit 3 fans underneath of 120mm to cool and airflow goes to the side. The backside has its nessesary holes for neutriks, powerswitch etc. Its completely anodisized. It has room for 5 laser sources so you can build a higher power system with these. Its made from quallity alluminium (not gum). I have limited stock of these....... A good projector starts with a good case......

The price for these are 400 euro.

[absolom7691]

Gorgeous cases! I love the aperture at the front for adjusting kinematics. If I were in the market, I would definitely pick one up!

[catalanjo]

Interesting !
Cheers

[-bart-]

I've seen these cases in person,and you can certainly see a lot of thought and care went into these top quality housings.

[edison]

Works also great as a beamblocker heatsink when adjusting lasers

[jjspike]

Thanks for the prompt response. On the rear of the case, there are 2 unused circular cut-outs (for DMX or Neutrik). What would these be used for? Does the large rectangular cutout fit the large Stanwax panel or do you have your own? I would like to use the full function Stanwax panel with the in/out, X/Y, RGB and other functions.

Hello Guys

To keep the development proces going i decided to sell a few of the bigger cases that i have in stock. The case is 440 x 250 x 170mm. Its a splitlevel case with a massive heatsink in it. You can fit 3 fans underneath of 120mm to cool and airflow goes to the side. The backside has its nessesary holes for neutriks, powerswitch etc. Its completely anodisized. It has room for 5 laser sources so you can build a higher power system with these. Its made from quallity alluminium (not gum). I have limited stock of these....... A good projector starts with a good case......

The price for these are 400 euro.

[-bart-]

You could equip them with ethercon for and FB4 or Fiesta.net.
You could also equip them with 5pole DMX sockets

Neutrik also has black dummy covers for these holes.

[jjspike]

Good to know - problem solved. Just have to get the final measurements for my power supplies and other items which will have to go into the case.

Thank you

You could equip them with ethercon for and FB4 or Fiesta.net.
You could also equip them with 5pole DMX sockets

Neutrik also has black dummy covers for these holes.

[edison]

added some pictures to give a better view on things

[daction]

looking good as always .
Looking forward to putting the 462nm blue module in my laser.
Thanks heaps bro!