A few lasers & other for sale or trade

[LaserGuy216]

I have a few items that are no longer needed. all items are working and tested unless stated otherwise.

2-1 watt 532nm lasever dpss with analog driver
1-200mw lasever 473nm dpss with analog driver( love this blue)
2-900mw 445nm dr.lava build with flexdrive v3 (SOLD 1)
2-dual 300mw 637nm w/pbs cube & flexdrive v3
1-dr.lava 445nm knife-edge custom build kit w/1.5w 445nm diodes
1-dr.lava 445nm knife-edge custom build kit w/o diodes
1-dual 445nm 700mw & 638nm 400mw with flexdrives v3 (SOLD)
1-500mw DHOM 532nm dpss with driver (SOLD)
1-500mw lasever 532nm dpss NON-WORKING with driver
1-200mw lasever 473nm dpss NON-WORKING with driver

paypal only please, open to trades looking for a FB4, otherwise please PM with your offer, Thank you

[LaserGuy216]

1watt lasever

[LaserGuy216]

1watt lasever , pic of other 1 watt lasever

[LaserGuy216]

$200 for the 2-900mw 445nm dr.lavas ( paid $175 each)
$400 for the 2-dr.lava custom build knife edge kits w/2 diodes ( think I paid $400 each)
$600 for the 2-1watt lasever (paid $1200 each)
$300 for the 2-dual 637nm (paid $200 each)
$100 for the dual 445nm & 637nm (paid $175)
$300 for the 200mw 473nm lasever (paid $1200)
$100 for the 500mw 532nm

[Bradfo69]

Which pic is the dual 445 and 637 unit?

[LaserGuy216]

2nd pic from the left, it has the 445nm diode & 637nm diode W/2 dr.lava flexdrivers v3, no cube or mirrors

[HankLloydRight]

Which pic is the dual 445 and 637 unit?

Hey Brad, let me know if you don't want/take these -- I'd love to use them in the Laserworld box I get at FLEM.

thanks.

[Bradfo69]

I was thinking of passing but, if your going to get the dual 445 and 637, take a look at that 500mW DHOM 532 to go with them. I think you'd end up with a nice little RGB or, (my thought) a pretty decent little lumia set up. (Assuming the DHOM is still available.)
.
I've gone back and looked at this several times but, I have far too much of this stuff sitting collecting dust. I really was thinking hard about the two 1 watt lasever 532's as well but, I have several 1 watt 532 modules kicking around and, I also can't bring myself to buy lasnever just based on reputation. May not be true but just what I've always heard.
.
Bet ya'll wouldn't see me get to the point of turning most of the things in this thread down, huh?

[HankLloydRight]

Oh, nice! I didn't see the 532.. would complement the others well (I was going to ask what wattage green should go with the red/blue dual setup). I guess 500mw is just about right. And I think all three should fit in the Laserworld box pretty well (we shall see!).

Another question for the experts: The total rated wattage of all three modules is: 700+500+400= 1600mw. What do you think the actual total output would be?

So I take this as you are passing on them (just to be sure)?

I hope to get this project done by SELEM.

thanks.

[Bradfo69]

Totally a guess on my part but I would say look for a 10-15% drop off out the window. Your bounce mirror, dichros and scanner mirrors will all rob just a little bit of power. The quality of each of those things all plays into the losses to expect. So somewhere in the 1.3-1.5 watt range perhaps. I don't think you'll visibly notice it for what you do with yours.